background image

Load a disc or connect a USB device.

Listening to an external device

Before listening to an external device, connect 
it properly to the unit.
Refer also to the instruction manual for an 
external device.

1.  Set the volume level of the unit to 

minimum.

2.  Connect an external device to the 

AUDIO IN jack on the rear of the unit.

1. Press 

CD 

6

 or USB 

6

.

Starts reading the disc or USB device and 
playback.

2.  Adjust the volume.

To stop playback,

 Press 

7

.

To pause,

 press CD 

6

 or USB 

6

.

•  To cancel pause, press 

6

 again. 

Playback continues from the point 
where it was paused.

To select a track,

 press 

4

 or 

¢

 .

• Press 

¢

 once to skip to the 

beginning of the next track.

• Press 

4

 to skip to the beginning of 

the track being played.
Press 

4

 twice quickly to skip to the 

beginning of the previous track.

To locate a track directly,

 press number 

buttons.

To fast forward/reverse,

 press and hold 

4

 or 

¢

 during playback.

To select a group (for MP3/WMA),

 press 

GROUP UP or GROUP DOWN. (Remote 
control only)

•  Press GROUP UP to skip to the next 

group.

•  Press GROUP DOWN to skip to the 

previous group.

To detach the dock adaptor

Pull up the dock adaptor with your fingernail 
or sharp pointed tool inserted to the slot.
•  Be careful not to injure your fingertips or 

damage the terminal of the dock.

Viewing video/picture 

While the unit is turned off, and iPod is not 
connected...

Press and hold iPod 

6

.

A

 Listening to iPod and viewing video/picture from iPod

B

 Playing back a disc/USB 

device

C

 Listening to 

FM stations

Using the timer 

(Remote control only)

D

 Adjusting the sound

Convenient playback 

(Remote control only)

1.  Press FM to select “FM.”

2.  Select the station.

•  Press and hold 

4

 or 

¢

 to change the 

frequency automatically until a station of 
sufficient signal strength is tuned in.

Presetting stations (Remote control only)

You can preset 30 FM stations manually.

1.  Tune in to a station you want to preset.

2. Press 

SET.

•  Finish the following steps while the 

indication on the display is flashing.

3.  Press the number button to select a 

preset number you want to store.

4.  Press SET to store the station.

To listen to the preset stations,

 press number 

buttons to select the preset number.

Tuning in to a preset station

Each time you press the button, you can select 
the preset station from 1 to 30.

You can select the preset station directly 

• 

pressing number buttons.

You can operate iPod through the unit.
•  Before connecting iPod to the unit, check its type 

and software version. (See playable iPod devices 
on the other side of this sheet.)

•  Note that any data cannot be sent to iPod from 

the unit.

CAUTIONS

•  JVC is not responsible for any loss of or damage 

to iPod that might result from the use of this 
product.

•  When you connect iPod to the unit, make sure 

the connection on this unit is fully inserted into 
iPod.

•  Do not carry the unit with iPod connected. You 

might drop it down or it might cause damages to 
the connector part.

•  Do not touch or hit the iPod terminal pins or the 

connector pins directly. It might cause damages 
to the connector part.

•  Remove iPod from the unit when you do not use.
•  While playing back a track from iPod, do not 

disconnect the iPod. Doing so may cause 
malfunction of both this unit and iPod.

•  Always set the volume to the minimum level 

when connecting or disconnecting iPod.

•  Do not leave the front door open.
•  Do not press down on the front door when it is 

open, as the unit could fall and possibly cause 
an injury.

1. Press 

iPod 

6

.

iPod is turned on and starts playing.
•  When you have selected another source 

press iPod 

6

 again to start playback.

2.  Adjust the volume.

To pause,

 press iPod 

6

.

•  To cancel pause, press iPod 

6

 again. 

Playback continues from the point 
where it has been paused.

To select a track,

 press 

4

 or 

¢

 .

• Press 

¢

 once to skip to the beginning of 

the next track.

• Press 

4

 to skip to the beginning of the 

track being played.
Press 

4

 twice quickly to skip to the 

beginning of the previous track.

To fast forward/reverse,

 press and hold

4

 or 

¢

 during playback.

NOTE

With iPod selected as the source...
–  “CONNECT” appears on the display of the unit 

when iPod is connected.

–  “NOiPod” appears on the display of the unit 

when iPod is not connected.

–  Operate iPod touch or iPhone itself in the 

following cases:
•  When operating the home button.
•  When selecting application icons on the 

home screen.

•  When dragging the slider.

iPod menu operation 
(Remote control only)

1  Press MENU to display the menu.

2  Press GROUP UP or GROUP DOWN to 

select a menu item, then press SET to 
confirm it.

When the power is supplied through the AC outlet 
for the first time after the purchase, the CLOCK 
indicator and “0:00” (or “AM 12:00”) flash on the 
display. Set the clock before using the sleep and 
daily timers.

1. Press 

CLOCK/TIMER.

2. Press 

4

/

1

 or 

¡

/

¢

 to adjust the hour.

•  When you press and hold the button, the 

hour digit changes continuously.

3. Press 

SET.

The minutes digits start flashing on the display.

4.  Repeat 2 and 3 to adjust the minute.

•  When you press and hold 

4

/

1

 or 

¡

/

¢

 while adjusting the minutes, the 

minutes digits change continuously.

•  If you want to change the hour setting while 

adjusting the minutes, press CANCEL.

Finish setting the clock.

To display the clock,

 press DISPLAY.

•  Each time you press the button, the clock and 

normal indicator changes alternately.

NOTE

•  About one hour after you disconnect the AC 

power cord, the set time will be reset.

•  If the power supplied using batteries, the clock 

does not appear on the display when the unit is 
turned off.

Press SLEEP.

Each time you press the button, the shut-off time 
(in minute) changes as follows:

10

 

\

 

20

 

\

 

30

 

\

 

60

 

\

 

90

 

\

 

120

 

\

 

OFF

 

\

 

(back to the beginning)

The unit is now set to turn off after the minutes you 
set have elapsed.

If no operation is performed while the Sleep Timer 

is set to longer than 30 minutes, the unit turns off 
automatically 30 minutes later.

To check the remaining time until the unit shuts 
off,

 press SLEEP once.

To cancel the sleep timer

, press SLEEP repeatedly to 

select “OFF.”

Using the Daily Timer, you can wake up with your 
favorite music.

NOTE

Tune into a station, load a disc, or connect a USB 
device/iPod to the unit, and make sure that the 
source works properly beforehand.

1. Press 

CLOCK/TIMER.

2. Press 

4

/

1

 or 

¡

/

¢

 to adjust the 

hour.

•  When you press and hold the button, 

the hour digit changes continuously.

3. Press 

SET.

The minutes digits start flashing on the 
display.

4.  Repeat 2 and 3 to adjust the minute 

and select the source, and adjust 
volume.

•  When you press and hold 

4

/

1

 

or 

¡

/

¢

 while adjusting the 

minutes, the minutes digits change 
continuously.

5. Press   to turn off the unit.

•  When the on-time comes, the unit sets 

the volume gradually to the preset 
level.

•  The daily timer works only when the 

unit is on standby.

To correct a misentry during the process,

 

press CANCEL.

You can return to the previous step.

To change the set timer info when 

 is 

lit, 

press CLOCK/TIMER twice.

You can start setting from step 2.

Adjusting the volume

You can adjust the volume level between MIN 01 
and 30 MAX.

You can program up to 30 tracks from a disc or a 
USB device in any desired order including the same 
tracks.

NOTE

•  You can only make a program when playback is 

stopped.

•  While making a program, you cannot specify a 

group number to select a track.

Load a disc or connect a USB device before 
making a program.

See 

ı

 Playing back a disc/USB device.

1. Press 

CD 

6

 or USB 

6

.

2. Press 

7

 to stop playback.

3.  Press PLAY MODE to select “PROGRAM.”

4.  Press the number buttons to select the track 

to program.

5.  Repeat step 4 to select other tracks for the 

program.

•  To cancel the last track in the program, press 

CANCEL once.

6. Press 

CD 

6

 or USB 

6

.

Playback starts.

While stopped:
To confirm the programmed tracks,

 press 

 

4

/

1

 

or 

¡

/

¢

 repeatedly; the tracks in the 

program will successively appears on the display in 
the programmed order.

•  To add a track to the end of the program, press 

the number buttons to select the track.

To delete the tracks in the program,

 press CANCEL 

repeatedly.

•  Each time you press the button, the last track 

in the program is erased.

•  Turning off the power also clears the program.

To exit from the program play,

 press PLAY MODE 

repeatedly until the “PRGM” indicator goes off.

You can play all the tracks, on the disc or USB device 
in random order.

Load a disc or connect a USB device before 
random play.

See 

ı

 Playing back a disc/USB device.

1. Press 

CD 

6

 or USB 

6

.

2.  Press PLAY MODE to select “RANDOM.”

The tracks are played in random order 
once.

• The 

4

/

1

 button works only to go back 

to the beginning of the current track during 
the random playback.

To exit from random mode,

 press PLAY 

MODE. The “RANDOM” indicator goes off.

You can repeat a track or tracks on the disc or 
USB device as many times as you like.

Press REPEAT.

Each time you press the button, the play 
mode changes as follows:

For CDs:

ALL 

\

 

 

\

 

canceled

 

\

 

(back to the beginning)

• ALL:

• 

:

Repeats all the tracks on the 
disc.

In program mode or 

• 

random mode, only 

ALL 

can be selected.

Repeats the current track.

For MP3/WMA files:

ALL 

\

 

GROUP 

\

 

 

\

 

canceled 

\

 

(back to the 

beginning)

• ALL:

• GROUP:

• 

:

Repeats all the tracks on the 
disc or USB device.

In program mode or 

• 

random mode, only 

ALL 

can be selected.

In normal play mode, repeats 
all the tracks in a group.
Repeats the current track.

To exit from the repeat mode,

 press REPEAT 

repeatedly until the repeat indicator goes off.

Connect iPod

Disc

USB device

Main unit

Remote control

Start Playback

Main unit

Remote control

Main unit

Remote control

Setting the Clock

Start Playback

Program Playback

Random Playback

Repeat Playback

Main unit

Remote control

USB cord

USB 
memory

Main unit

Remote control

Main unit

Remote control

Main unit

Remote control

Adjusting the super woofer volume

You can adjust the super woofer volume level 
between 1 and 6.

B

Front door

Open the front door

Dock adaptor 

(supplied with iPod 

or sold separately)

Connecting other equipment

Microphone/guitar mixing

Using a microphone or a guitar, you can mix its 
sound with a source sound.

CAUTION

DO NOT connect a bass guitar to the MIC/GUITAR 
INPUT jack, as it may damage the unit.

1.  Make sure the MIC/GUITAR selector switch on 

the rear of the unit is properly set.

2.  Set the MIC/GUITAR LEVEL control to – by 

turning it counterclockwise.

3.  Connect a microphone or a guitar into the 

MIC/GUITAR INPUT jack on the rear of the 
unit.

4.  Start a source.

5.  Adjust the volume and microphone/guitar 

levels.

Using Headphones

Be sure to turn down the volume before 
connecting or putting on the headphones.
•  Connecting the headphones deactivates 

the speakers.

•  Sound adjustments other than the super 

woofer volume level also affect the sound 
through the headphones.

NOTE

If iPod is selected as a source, no sound is 
heard from headphones.

To turn off the daily timer,

 press CANCEL.

•  While the timer is being set, the timer indicator 

(

) lights up.

•  While the timer is working, the timer indicator (

flashes.

•  If you do not operate the unit for more than 1 

hour, the unit will turn off.

How to select a number using the remote control

Examples:

To select number 5, press 5.

• 

To select number 15, press +10 then 5.

• 

To select number 20, press +10 once, then 10.

• 

To select number 125, press +100, +10, +10 then 5.

• 

Turn on the power at first.

A

B

C

D

D

Setting the Sleep Timer

Setting the Daily Timer

Sound mode

Sound modes can be selected to enhance the 
type of music being played.

Press SOUND MODE to select the sound 
mode.

Each time you press the button, the sound 
mode changes as follows:

Sound mode selection:
BEAT:

  Set to this position for music with a 

heavy beat, such as rock and disco 
music.

POP:

 

Set to this position for light music 
including popular and vocal music.

CLEAR:

 Set to this position for crisp and clear 

sounding music.

FLAT:

  (no effect): Set to this position not to 

apply any sound mode.

Turning off  the sound temporarily (Remote 
control only)

Press MUTING.

To restore the sound, press MUTING again or 
adjust the volume.

Current track 

number

Playback 
time

Display during playback

Improving the FM reception (Remote 
control only)

When an FM stereo (FM) broadcast is hard to 
receive or noisy, select the monaural reception 
(MONO) mode.

Press FM MODE.

•  To restore stereo reception, press FM MODE 

again.

Adjusting the antenna

Adjust the FM telescopic antenna’s length, 
angle and direction until the best reception is 
obtained.

Main unit

3.  Press AUDIO IN to select “AUDIO.”

4.  Press and hold SET to adjust the source 

input level. Each time you press the 
button, the input level changes as follows:

LEVEL1 

\

 LEVEL2 

\

 LEVEL3 

\

 (back to the 

beginning)
•  LEVEL1: Ordinary input level.
•  LEVEL2: Increases the input level.
•  LEVEL3: Increases the input level more 

than “LEVEL2.”

5.  Start playback of the external device.

6.  Adjust the volume of the unit.

Refer also to the instruction manual for iPod for 
details.

Turning off  iPod

Press and hold iPod 

6

 for about 2 seconds.

•  Selecting another source also turns off iPod.
•  Turning off the unit may not turn off iPod 

depending on the current source.

About the battery charge of iPod

•  When the unit is connected to the AC outlet:

The iPod battery is charged if the unit is 
turned on.

•  When the unit is operated on batteries:

The iPod battery is not charged even if the 
unit is turned on.

Each time you press and hold the button, the 
indicator changes alternately as follows:

VOUT ON: View video/picture from iPod on 

• 

the monitor.
VOUT OFF: View video/picture on iPod.

• 

Main unit

CAUTION:

Excessive sound pressure from earphones or 
headphones can cause hearing loss.

or

or

(On the right)

Main unit

(On the left)

Remote control

Main unit

Remote control

DO NOT turn off the unit with the volume 
set to an extremely high level;

 otherwise, the 

sudden blast of sound may damage your hearing, 
speakers, and headphones when you turn on the 
unit or start playback.

Guitar

Microphone

Main unit

Remote control

Headphones
(not supplied)

Microphone or guitar
(not supplied)

Monitor
(not supplied)

External device
(not supplied)

Composite video cord
(not supplied)

φ

 

6.3 monaural cable

(not supplied)

Stereo mini plug cord
(not supplied)

Rear of the unit

or

0829̲RV-NB70[JBEA]revB̲1.indd   2

0829̲RV-NB70[JBEA]revB̲1.indd   2

12.8.29   5:50:50 PM

12.8.29   5:50:50 PM

Отзывы: