37
Operating Other Manufacturers
’
Video Equipment
By changing the transmittable signals, you can use the remote
control supplied for this unit to operate other manufacturers
’
equipment.
•
Refer also to the manuals supplied for the other products.
•
To operate these components with the remote control, first you
need to set the manufacturers
’
code each for TV, CATV converter,
VCR and DVD player.
•
After replacing batteries of the remote control, set the
manufacturers
’
codes again.
To change the transmittable signals
for operating a TV
1
Press and hold TV
.
2
Press TV/DBS.
3
Enter manufacturer
’
s codes using buttons 1
–
9,
and 0.
4
Release TV
.
Now, you can perform the following operations on the TV.
TV
:Turn on or off the TV.
TV/VIDEO
: Set the input mode (either TV or VIDEO).
TV VOL +/
–
: Adjust the volume.
After pressing TV/DBS, you can perform the following
operations on the TV:
CH +/
–
: Change the channels.
1
–
9, 0, +10 (100+)
: Select a channel.
10
: Function as the ENTER button.
Note:
Refer also to the manual supplied with your TV.
5
Try to operate your TV by pressing TV
.
When your TV turns on or off, you have entered the correct
codes.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
Operating JVC
’
s Audio/Video Components / Operating Other Manufactur
ers
’
Video Equipment
Manufacturer
Codes
JVC
00
*
, 02, 13, 14, 47, 74
AKAI
01, 02
BLAUPUNKT
03, 04
FISHER
01, 05
GRUNDIG
03, 06, 07
HITACHI
08, 09, 10, 49
IRADDIO
02
ITT/NOKIA
11, 12
LOEWE
06, 15, 16
MAGNAVOX
08, 17, 49
METS
50, 51, 52, 53
MITSUBISHI
08, 18, 19, 20
MIVAR
21
NORDMENDE
22, 23
OKANO
15
PANASONIC
24, 25, 26, 27, 76
PHILIPS
15, 17, 28, 75
QUELLE
52, 53, 54, 55, 56, 57, 58,
59, 60, 61, 62, 63, 64, 65,
66, 67
RCA/PROSCAN
08, 24, 29, 30, 31, 48
SABA
32, 33, 68, 69, 70
SAMSUNG
06, 08, 16, 34, 35, 49
SANYO
01, 05
SCHNEIDER
02, 15, 36
SHARP
37, 38, 77
SONY
39
TELEFUNKEN
40, 41, 42, 69
THOMSON
71, 72
TOSHIBA
37, 43, 44
ZENITH
45, 46
Manufacturers
’
codes for TV
*
“
00
”
is the initial setting.
Manufacturers
’
codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
TO BE CONTINUED TO THE NEXT PAGE
To change the transmittable signals for
operating a CATV converter or DBS tuner
1
Press and hold CATV/DBS
.
2
Press CATV/DBS CONTROL.
3
Enter manufacturer
’
s codes using buttons 1
–
9,
and 0.
4
Release CATV/DBS
.
Now, you can perform the following operations on the CATV
converter or DBS tuner.
CATV/DBS
: Turn on or off the CATV converter or DBS tuner.
After pressing CATV/DBS CONTROL, you can perform the
following operations on the CATV converter or DBS tuner:
CH +/
–
: Change the channels.
1
–
9, 0, +10 (100+)
: Select the channels.
10
: Function as the ENTER button.
Note:
Refer also to the manual supplied with your CATV converter or
DBS tuner.
EN30-42.RX-7020V[J]f
01.12.27, 3:37 PM
37
