JVC RM-RE9000, Руководство по обслуживанию

Страница: 5 / 37

RM-RE9000
1-5
Remove the rear cover.
Remove the remote controller transmission board
assembly.
Remove the main board assembly.
Remove the two screws
I attaching the modular jack
board assembly.
Remove the connector CN501 connecting the main
board assembly to the connector terminal board
assembly.
1.
2.
3.
4.
5.
Removing the modular jack board
assembly (See Fig.8)
Remove the rear cover.
Remove the remote controller transmission board
assembly.
Remove the main board assembly.
Remove the modular jack board assembly.
Remove the seven screws
J attaching the switch
board.
Remove the board by lifting it.
1.
2.
3.
4.
5.
6.
Removing the switch board (See Fig.9)
Removing the top panel (See Fig.10)
Remove the rear cover.
Remove the remote controller transmission board
assembly.
Remove the main board assembly.
Remove the modular jack board assembly.
Remove the board.
Remove the two screws
K attaching the lens and the
top panel.
1.
2.
3.
4.
5.
6.
Reminder when the top panel is
reassembled
When the top panel is reassembled, use the screws
with the specified size (M3x8mm) without fail
(Screws marked
K ).
Using longer screws may damage the top panel and
cause the top panel unstable.
1.
Fig.8
Fig.9
Fig.10
I
Modular jack board
assembly
J
Switch board
CN501
J
Top panel
Lens
I
J
J
K
K
J
J
J