Thank you for purchasing the JVC rack mount adapter. Please carefully read these assembly and installation instructions before
beginning assembly.
Safety Precautions
Please read and understand these safety precautions before using this product.
Symbols
To highlight usage precautions and product depictions to assure safe and correct product usage and to avoid danger or injury to
persons using this product or other persons, several symbols are used.
Warning
Improper handling in disregard of these notices may result in bodily injury and even death.
Caution
Mishandling of the unit in disregard of these notices may result in bodily injury or damage to the unit.
Assembly/Installation Precautions
Warning
¶
Attaching this product to monitors other than those authorized by JVC may result in the monitor falling over or falling down,
potentially causing damage or bodily injury.
¶
To assure secure installation when attaching this product to an EIA rack, separately provide appropriate screws and bolts
yourself. Do not improperly attach, or use improper screws or bolts. Doing so may result in the monitor or EIA rack falling over
or falling down, potentially causing damage or bodily injury.
¶
Assemble all provided bolts, nuts and screws securely. Failure to do so may result in the monitor falling over or falling down,
potentially causing damage or bodily injury.
¶
Do not install in unstable locations such as uneven or sloped surfaces or locations subject to vibration or shock. Doing so may
result in the monitor falling over or falling down, potentially causing damage or bodily injury.
Caution
¶
To avoid against bodily injury or damage, be sure that you have sufficient working area before beginning assembly.
¶
Use this product only in a place where the temperature is between 0°C and 35°C. Failure to do so may cause damage to the monitor.
Parts List
Rack mount base x 1
Screw x 8 (M4 x 10 mm)
Please contact the store where you purchased the
product if any parts are missing.
Dimensions
unit:mm
Weight: 1.3 k
g
Assembly and Installation Instructions
RACK MOUNT ADAPTER
RK-C9D2
482
176.8
(4U)
107.6
Caution
To avoid injury to fingers, take care to not catch your finger between the monitor and the part
when tightening the parts together.
1.
Detach the stand from the monitor.
Refer to manual of monitor about how to remove the stand.
2.
Attach the monitor to the rack mount base.
3.
Attach the monitor to the rack.
Screws to install to an EIA rack must be prepared separately.
Installation Instructions
Rack mount base
Monitor
Screw (M4 x 10 mm)
LC35061-001A
Screw (M4 x 10 mm)
© 2012 JVC KENWOOD Corporation
Tools required for
assembly
Philips-head screwdriver
*Specifications and appearance of this unit are subject to change for
improvement purposes without prior notice.
*Tightening torque of the screw : 0.8 - 1.0 N·m
RK-C9D2̲JP̲EN.indd 4-5
RK-C9D2̲JP̲EN.indd 4-5
2012/11/21 15:03:13
2012/11/21 15:03:13
