JVC RC-E561B-DAB, Инструкция по эксплуатации

Страница: 12 / 100

EN
To repeat current folder (for MP3 only)
1. Press PROG./M/P-MODE button in play mode, till the “ REP-ALBUM ” shows steady on
the display, the current folder will be played repeatedly until the /MENU/INFO button is
pressed.
2. To cancel Repeat function, press the PROG./M/P-MODE button until the “ REP-ALBUM ”
disappear on the LCD display.
RANDOM PLAY
Press the PROG./M/P-MODE button in play mode till the “ RANDOM ” shows steady on the dis-
play, the random play will start immediately until all tracks are played over and then stop. Press
the PROG./M/P-MODE button once to cancel.
INTRO
Press the PROG./M/P-MODE button in play mode till the “ INTRO ” shows steadily on the
display, the intro play will start and scan 10 seconds for every track. To cancel intro play, press
the PROG./M/P-MODE button until “ INTRO ” disappear from the display.
USB OPERATION
1. Press the /FUNC. button to choose USB mode.
2. Connect the USB to the USB INPUT. The LCD will show the total number of tracks and
folders stored in the USB. After reading the USB, the unit will start playback automatically.
3. Press the /MENU/INFO button on unit to stop playing. The display will show total number
of tracks and folders.
4. Proceed repeat play (repeat 1- repeat folder - repeat all - random - intro) operation as the
same described in above CD/MP3 OPERATION.
CAUTION : Do not use any USB extension cable for connecting the USB bar which may cause harmful
interference.
BLUETOOTH OPERATION
1. Press the /FUNC. button to switch to BLUETOOTH function, the LCD will display
flashing “ UNCONNECT ” at high speed.
2. Turn on the Bluetooth function on the device, scan the unit “ JVC RC-E561B-DAB ” and
connect, then input the password 0000 if required, the “ BT MODE CONNECT ” will show
steadily to indicate connection done. Press the
/SELECT/SCAN/PAIR
button on the unit
or play key on the device to start playback.
3. If the unit can‘t connect the relative Bluetooth within
2 minutes, press and hold the /SELECT/SCAN/PAIR button on unit to reconnect.
4. Press the VOL.+/- buttons to select your desired level.
5. Press
/TUN+
or
/TUN-
on the unit to choose the desired track.
6. To stop playback, press /SELECT/SCAN/PAIR button.
Note: The Bluetooth works best within 10 meters.