(No.MB385)1-15
3.1.10 Removing the speaker terminal board
(See Fig.18.)
• Remove the metal cover, tuner, video board, rear panel, main
board and center chassis assembly.
(1) From the top side of the main body, remove the tie band fix-
ing the parallel wire.
Reference:
After connecting the parallel wire, fix it with the new tie
band.
(2) Disconnect the parallel wire from the connector
CN106
on
the speaker terminal board.
(3) Release the locks (
i
,
j
) of the connectors (
CN205
,
CN214
)
and disconnect the speaker terminal board in an upward di-
rection.
Note:
When releasing the locks (
i
,
j
), take care not to break them.
Fig.18
Speaker terminal board
Speaker terminal board
CN205
CN214
CN106
Tie band
Primary board
Parallel wire
i
j
