MX-GT91R
1-20
Removing the try select switch board
(See Fig.14)
1.
2.
Remove the two screws G retaining the tray select
switch board.
Disconnect the tray select switch board from connector
CN804 on the CD servo control board.
Fig.15
Fig.14
Fig.16
Removing the cam unit
(See Fig.15 ~17 )
1.
2.
3.
4.
5.
Remove the CD loading mechanism assembly.
While turning the cam gear "
q
", align the Paul "
r
"
position of the drive unit to the notch position(Fig.16) on
the cam gear "
q
".
Pull out the drive unit and cylinder gear(See Fig.17).
While turning the cam gear "
q
", align the Paul "
s
"
position of the select lever to the notch position(Fig.18)
on the cam gear "
q
".
Remove the four screws
H
retaining the cam unit(cam
gear "q" and cams R1/R2 assembly)(See Fig.18).
Cam gear
q
Drive unit
r
G
H
J
H
Chassis assembly
Tray select
switch board
CN854
CN851
CN804
Cylinder gear
Drive unit
Fig.17
Select lever
Cams R1, R2 assembly
Cam unit
Cam gear
q
s
