JVC LYT1325-001A, Инструкция по эксплуатации

Страница: 36 / 56

FEATURES FOR RECORDING
36
EN
MasterPage: Left
Like the pupil of the human eye, the iris contracts in well-
lit environments to keep too much light from entering,
and dilates in dim environments to allow in more light.
Use this function in the following situations:
●
When shooting a moving subject.
●
When the distance to the subject changes (so its size in the
LCD monitor or the viewfinder changes), such as when the
subject is backing away.
●
When shooting on a reflective natural background such as
at the beach or when skiing.
●
When shooting objects under a spotlight.
●
When zooming.
1
Set the Power Switch to “
M
”.
2
Press EXPOSURE .
●
The exposure control indicator appears.
3
Adjust zoom so that the subject fills the LCD monitor
or the viewfinder, then press and hold SET for over 2
seconds. The exposure control indicator and the “ ”
indication appear.
4
Press SET . The “ ” indication changes to “ ” and
the iris is locked.
To return to automatic iris control
Press EXPOSURE twice. Or, set the Power Switch to
“
A
”.
●
The exposure control indicator and “ ” disappear.
To lock the exposure control and the iris
After step
2
, adjust the exposure by pressing
w
or
e
.
Then lock the iris in steps
3
and
4
. For automatic locking,
press EXPOSURE twice in step
2
. The exposure control
and the iris become automatic.
Backlight compensation brightens the subject quickly.
With simple operation, backlight compensation feature
brightens the dark subject portion by increasing the
exposure.
1
Set the Power Switch to “
M
”.
2
Press BACK LIGHT so that the Backlight
Compensation indicator “ ” appears.
To cancel Backlight Compensation
Press BACK LIGHT twice so that the “ ” indicator
disappears.
NOTE:
Using Backlight Compensation may cause the light around
the subject to become too bright and the subject to become
white.
Selection of a spot metering area enables more precise
exposure compensation. You can select one of the three
metering areas on the LCD monitor/viewfinder.
1
Set the Power Switch to “
M
”.
2
Press BACK LIGHT twice so that the Spot Exposure
Control indicator “ ” appears.
●
A spot metering area frame appears at the center of the
LCD monitor/viewfinder.
3
Press
w
or
e
to select the desired spot metering area
frame.
4
Press SET .
●
Spot Exposure Control is engaged.
●
Exposure is adjusted to make the brightness of the
selected area most appropriate.
To lock the iris
After step
3
, press and hold SET over 2 seconds. The
“ ” indication appears and the iris is locked.
To cancel Spot Exposure Control
Press BACK LIGHT once so that the “ ” indicator
disappears.
NOTES:
●
You cannot use the Spot Exposure Control at the same
time with following functions:
• “SQUEEZE” in “WIDE MODE” (
墌
pg. 30)
• “SPOTLIGHT”, “STROBE” or “SNOW” in “PROGRAM
AE” (
墌
pg. 38)
• Digital Zoom (
墌
pg. 18)
• Manual Exposure Control
●
Depending on the shooting location and condition, optimum
result may not be attained.
Iris Lock
Backlight Compensation
Spot Exposure Control
GR-DZ9_DZ7US_07Advanced.fm Page 36 Friday, June 4, 2004 8:40 AM