EN
23
FINE 12
22
21
1
0
Viewfinder
Remaining number
of shots
Pin-Up
A still image on a white
background. A shadow
effect is added to give it
a three dimensional feel.
Full
A still image that
occupies the entire
image field is recorded.
(Blinking)
NOTES:
●
Six sample images have been stored in the built-in
memory at the factory.
If you wish to delete them, first remove the “Protect”
function (
Z
pg. 57), then perform the “Delete”
function (
Z
pg. 58).
●
When the remaining number indicator displays “0”
(bliking), the still image will be recorded onto the tape
but not in the built-in memory. If you wish to store a
still image in the built-in memory, perform the
“DELETE” function in the Menu Screen to remove still
images you do not need (
Z
pg. 58).
●
The Picture Mode can be switched to either “FINE” or
“STANDARD”. Since the remaining number of shots
available depends on the selected Picture Mode,
switching the Picture Mode will vary this number.
●
If the SNAPSHOT Button is pressed with the System
Select Switch set to “D.S.C.”, the still image cannot be
recorded onto the tape, but will be stored in the
camcorder's built-in memory (
Z
pg. 46).
●
Image data stored in the camcorder’s built-in memory
can be transferred to a Windows
®
PC or Macintosh
®
and saved using the provided image transfer software
(
Z
pg. 61). The image data transferred to a personal
computer can also be further processed using Paint
Software.
●
When a Pin-Up is taken with the Wide mode
(
Z
pg. 27) activated, the black bars at the top and
bottom of the screen will disappear.
●
When a Snapshot is taken in a dark environment, the
still image recorded onto the tape and stored in
memory will become coarse and its true colours will
be lost.
Pictrue mode display:
FINE or STD (standard)
