TUNER FM
AUDIO IN
1
1
2
2
3
3
1
1
2
2
3
3
SET
LOCKED
UNLOCKED
LEVEL 1
SET
LEVEL 2
LEVEL 3
RESUME
iPod
iPod
UP
DOWN
SET
TUNER FM
AUDIO IN
UP
DOWN
SET
UP
DOWN
2
2
2
Resume Play
This System stores the beginning of the stopped
track on the disc.
When you start playback again, it starts from the
beginning of the stored track.
To clear the stored position...
Press
7
twice.
Open the disc tray.
This function can not be used for Program Play.
Prohibiting disc ejection
You can lock the disc tray.
While the System is on standby...
•
–
–
•
1
2
Start playback of the external device.
Repeat Play
Repeats the current track.
Repeats the current group (MP3/WMA
only).
ALL
Repeats all contents or programmed
tracks.
No indicator
Cancels.
Random Play
To cancel Random Play, press
RANDOM
again.
Program Play
While playback is stopped...
1
2
Select a track number (up to 32 tracks).
To cancel, press
MENU/CANCEL
.
3
To check the programmed contents, press
SET
repeatedly while playback is stopped.
To exit Program Play, press
7
while playback is stopped.
The stored program is erased.
•
•
•
•
–
Stereo mini plug cord
(not supplied)
Headphones (not supplied)
DO NOT turn off the System with the volume set to an extremely high level;
otherwise, the sudden blast of sound may damage your hearing, speakers, and
headphones when you turn on the System or start playback.
Remote sensor
Adjust the volume.
Turn on
the power.
Select a source.
Basic operation
External
device
Playback operation
Adjusting the audio input level
You can change the audio input level through the
AUDIO IN jack.
The playback sound is the maximum when you
select LEVEL3.
•
Stereo mini plug cord
(not supplied)
Playback operations
Disc
To open the disc tray
Press
0
on the main unit.
To select a track
Press
¢
or
4
.
To fast-forward a track
Press
¡
.
To stop fast-forwarding, press
CD
6
.
To fast-reverse a track
Press
1
.
To stop fast-reversing, press
CD
6
.
To select a group
Press
UP
or
DOWN.
To stop playback
Press
7
.
•
•
(While holding
7
)
(On the main unit)
The
HP
indicator is displayed when headphones are
connected to the System.
Be sure to turn down the volume before connecting
or putting on the headphones.
•
STANDBY lamp
(Hold)
Label side
To play back/pause a disc
Canceled
Playback operations
Information shown on the display differs depending
on the type of the iPod.
To play back/pause iPod
Press
iPod A
6
or
iPod B
6
.
To select a track
Press
4
or
¢
.
To fast-forward a track
Press and hold
¡
.
To fast-reverse a track
Press and hold
1
.
To play back at random
Press
RANDOM
repeatedly.
If you hold
RANDOM
when two iPod devices are
connected to the System, “SHUFFLE” appears on
the display and Random Play applies to both iPod
devices.
To play back repeatedly
Press
REPEAT
repeatedly.
To put iPod in sleep mode
Press and hold
iPod
A
6
or
iPod B
6
.
*
–
Menu operations
To display the menu/to go back to the previous
menu
To select an item on the menu
Notes:
Operate iPod touch itself in the following cases:
When operating the home button.
When selecting application icons on the home
screen.
When dragging the slider.
Sound distortion may occur when playing back
audio sources with high recording levels. If
distortion occurs, it is recommended to turn off
the equalizer of iPod. For information on operating
iPod, see the instruction manual for iPod.
•
–
–
–
•
Dock adaptor (supplied with the
iPod or sold separately)
Notes on iPod connection
When detaching the dock adaptor from the dock, pull up
the dock adaptor with your fingernail or sharp pointed
tool using the slot.
Be careful not to injure your fingertips or damage the
terminal of the direct dock.
DO NOT connect or disconnect the iPod when the System
is turned on.
Be sure to reduce the volume on the System to the
minimum level before connecting iPod. Adjust the
volume after starting playback.
You cannot send any data to the iPod from the System.
Do not carry the System with iPod connected. It might
cause damage to the dock or you might drop the iPod.
Do not touch or hit the iPod terminal pins or connector
pins in the dock for iPod directly. Doing so might cause
damage to the connector pins.
iPod is charged through the dock when the System is
turned on.
When two iPod devices are connected, both iPod devices
are charged.
•
•
•
•
•
•
•
•
Before viewing a video/picture from your iPod on your monitor:
Make the appropriate video setting on iPod. For details of the setting, see the instruction manual for iPod.
FM radio
Searching for stations
1
2
The station search stops when a station of
sufficient signal strength is found.
To manually stop the search, press
4
or
¢
.
When you press
4
or
¢
repeatedly, the
frequency changes step by step.
When an FM program is
broadcast in stereo, the
S
(stereo)
indicator lights up.
•
•
•
(Hold)
(Hold)
Improving the reception
To improve the reception
When the monaural mode is activated, the reception is
improved. However, the stereo effect is lost.
To restore the stereo effect, press
TUNER MODE
again.
Presetting stations
You can preset up to 30 FM station.
While listening to a target station...
1
2
Select a preset number.
3
Tuning in to a preset station
•
•
Preset number
or
When you connect iPod to the dock, CONNECT
is shown on the display first, followed by
AUTHRSNG and then SUCCEED. You can play iPod
after SUCCEED is shown.
UXF3B[JC]5th_F.indd 2
UXF3B[JC]5th_F.indd 2
10.4.15 11:27:50 AM
10.4.15 11:27:50 AM
