background image

14

Playing Back Discs

This unit has been designed to play back the following
discs—CD, CD-R, and CD-RW.

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-
ReWritable) can be played only if they are already
“finalized.”
• Usually you can play back your original CD-Rs or CD-

RWs recorded in music CD format. However, sometimes
they may not play depending on their characteristics or
recording conditions.

• Before playing CD-Rs or CD-RWs, read their instructions

or cautions carefully.

• Some CD-Rs or CD-RWs may not play on this unit because

of their disc characteristics, damage or stain on them, or if
the player’s lens is dirty.

• CD-RWs may require a longer readout time. This is

because the reflectance of CD-RWs is lower than for
regular discs.

Notes for MP3 files

• The player can only recognize files with “MP3” or “mp3”

as the extensions, which can be in any combination of
upper and lower case. The file name needs to be up to 20
characters.

• This unit recognizes files and folders on a disc in the

following conditions (including the root folder):
– up to 512 folders and files.
– up to 8th layers.

• It is recommended that you record your material at a 44.1

kHz sampling rate, using the 128 kbps data transfer rate.

• Some MP3 files or discs may not be played back because

of their characteristics or recording conditions.

• MP3 discs requires a longer readout time than normal discs

because of the complexity of the folder/file configuration.

• MP3i and MP3 Pro are not available.

General notes

In general, you will have the best performance by keeping
your discs and the mechanism clean.
• Store discs in their cases, and keep them in cabinets or on

shelves.

• Keep the unit’s disc trays closed when not in use.

Continued use of irregular shape discs (heart-shape,
octagonal, etc.) can damage the unit.

Caution for DualDisc playback:

The Non-DVD side of a “DualDisc” does not comply with
the “Compact Disc Digital Audio” standard. Therefore, the
use of Non-DVD side of a DualDisc on this product may not
be recommended.

CD

CD

Playing Back the Entire Disc—Normal Play

1

Press 

0

 OPEN on the unit.

The disc cover opens.
• You can insert a disc while listening to another source.

2

Place a disc correctly with its label side up.

3

Close the disc cover gently.

4

Press CD.

The unit automatically turns on and the
source changes to the CD player.
After loading the disc, total track number and
total playing time appear on the display.

• Total playing time does not appear when MP3 disc is

loaded.

5

Press CD 

3

/

8

.

The first track of the disc starts playing.

• The disc automatically stops when the last track has

finished playing.

While playing back an MP3 disc

ID3 Tag information (the name of the title, artist, and album up to 30
characters) will be shown on the display. When the name is too long
to be displayed at once, it is scrolled.
This unit supports ID3 Tag ver. 1.0.

Good

Not good

Continued 

When playing
audio CD:

Elapsed
playing time

MP3 indicator

Elapsed
playing time

When playing MP3 disc:

Current track
number

Current track
number

Total track
number

Total playing
time

Total track
number

When stop playing
MP3 disc:

When stop playing
audio CD:

Total group
number

Group folder indicator

UX-G1[B]_rev_08CD_f.p65

05.1.28, 11:28 AM

14

Содержание LVT1356-001B





























Отзывы: