background image

28

Menu system instruction

Menu system instruction

PVR Option

1. Press 

MENU

 key to display the main menu on the screen.

2. Press 

p

/

q

 key to select " VR Option" option.

P

3. Press 

u

 key to enter " VR Option" submenu.

P

PVR File System 

1. Press 

p

/

q

 key to select “PVR File System” option. 

2. Press 

ENTER

 or 

u

 key to enter submenu in DTV mode.

Connect the USB disk to the standard USB port before 

 PVR.

using

 l

 Select Disk: Press OK” button to enter submenu and press 

choose the disk for PVR.

 “

 

 

to 

t

/

u

 l

 

 Shift Size: Display the buffer used for PVR.

Time

 l

 Format Start: Press “OK” button to enter format submenu. 

 l

 Speed:  Display the disk writing/reading speed.

Warning: 

1. The disk must be formatted when first used for PVR, so backup the original data in the disk.

 use a special disk for PVR. Don’t modify the PVR file in PC.

It is recommended to

Note: The recorded PVR file will be in encrypted form. It can only be viewed on the TV.

Start Record

ENTER

Press 

/

key to select “Start Record”. If the storage device is ready, press “

” key to 

start recording.

The recording menus will disappear in 5 seconds, press “MENU” key to call them out.
When recording, press “

” key again, then you can choose to stop recording or continue:

PVR Option

PVR File System

Start Record

Start Timeshift

Record Files

Picture

Sound

Setting

Lock

Program

Network

About

PVR Option

PVR Option

Select Disk

Select Partition

Time Shift Size

Format

Speed

PVR File System

USB:1

1

512M

Start

check

u

t

u

t

u

t

Picture

Sound

Setting

Lock

Program

Network

About

PVR Option

Are you sure want to stop PVR?

Yes

No

CH 9 Nine Digital

00:00:09

03:50:25

Содержание LT-65N7105A











































Отзывы: