background image

To navigate the thumbnail index screen:

 Press S T W or X to highlight a folder or photo, then 
press OK.
-Press S T W or X to highlight a folder or photo, then 
press OK.
-If you select a folder and press OK, the folder opens 
and displays thumbnails of the photos in the folder. 
Press to return to the previous thumbnail screen or 
folder.
-If you select a photo and press OK, the photo is 
displayed full-screen.
-If all the photos do not fit on one screen:
-Highlight the top left thumbnail, then press
W to move to the previous screen.
-Highlight the bottom right thumbnail, then press X to 
move to the next screen.

To navigate on a full-screen photo:

-Press W or X to view the previous or next photo.
-Press S to rotate the photo 90° counter-clockwise or 
press T to rotate the photo 90° clockwise.
-Press EXIT to close the Media Player. In the 
message that appears, use W or X to select Yes, 
then
press OK.

3.  Press W X S or T to adjust the option or select a 
setting, then press OK.
4.  Press EXIT to close the menu.

Changing channel settings

This section covers:
 Automatically  scanning for channels
 Manually adding channels to the channel list
 Hiding channels

Automatically scanning for channels

When you scan for channels, your TV searches for 
channels with signals and stores the channel 
information in the channel list. When you press CH+ 
or CH–, your TV goes to the next or previous channel 
in the channel list. The channel scan may take 
several minutes.

Note

When you scan for channels, your TV erases any 
channels already stored in the channel list.
If a channel is not stored in the channel list, you can:
-Use the number buttons on the virtual remote 
control to enter the channel number. See Number 
page on page 18.
-Manually add the channel to the channel list if the 
channel has a good signal strength. See Manually 
adding channels to the channel list .

1.  Make sure that you have set up the
ANT / CABLE IN jack before programming
channels. See Setting up the ANT / CABLE IN jack on 
page 50.
2.  Press MENU, press S or T to highlight
Installation, then press OK.

Accessibility

Picture

Sound

Options

timers

Get Help

<  Installation

Menu Language                  English 

Home / Retail Mode               Home

Time  Zone                            Eastern

DAYLIGHT Saving Time      Off

Channel Tuning

Quick Setup

Reset TV

Installation

3.  Highlight Channel Tuning, then press OK.

4.  Highlight Auto Tuning, then press OK. Press OK 
again to start the scan. Your TV scans for available 
channels. The scan may take several minutes.

Notes

If you created a 4-digit PIN, enter your PIN to start 
scanning. For more information, see Setting a new 
PIN on page 69.
You can press EXIT to stop the auto channel search, 
but you will need to run the auto channel search again 
to create a channel list.

5.  When the scan is complete, press EXIT to close 
the menu. Your TV tunes to the first scanned channel.

Manually adding channels to the channel list

Channels with weak signals may not be added to the 
channel list when you scan for channels. You can 
manually add a channel to the channel list if you know 
the channel number and the channel has a good 
signal strength. (Use the number buttons on virtual 
remote control to enter the channel number.)
1.  Press MENU, press S or T to highlight
Installation, then press OK.

Accessibility

Picture

Sound

Options

timers

Get Help

<  Channel

 

Tuning

ANT

/

CABLE

 

IN

Auto

 

Tuning

Manual

 

Tuning

Channel

 

List

Installation

Accessibility

Picture

Sound

Options

timers

Get Help

<  Installation

Menu Language                  English 

Home / Retail Mode               Home

Time  Zone                            Eastern

DAYLIGHT Saving Time      Off

Channel Tuning

Quick Setup

Reset TV

Installation

OPERATION

-23-

Содержание LT-49MA875































Отзывы: