17
Customising your TV
Installation
Service Scan
Signal Check
Factory Settings
Update the PR list
Select a “Scan” type
:
Scan all receivable channels
:
Scan between the “Start channel” and “Stop channel”
:
Scan all receivable channels, then you can select the broadcasting stations
to register
If you select “Manual”, select the broadcast channel numbers to start and
stop scanning.
Select a “Mode”
:
Register only new channels and update the PR list. The current PR list
settings will not be changed. No channel will be deleted.
:
Re-install all channels. The current PR list settings and “Timer” settings will
be cancelled. The channels which the TV could not receive will be deleted.
䡵
To update the PR list
Set “Scan” to “Automatic” or “Network”. If you want to retain the current PR list settings and
“Timer” settings, set “Mode” to “Add”. Then start “Service Scan”.
Select
Exit
MENU
OK
Navigate
Service Scan
14:00 05/05/2007
Automatic
Service
Scan
_ _
Start Channel
_ _
Stop Channel
Add
Mode
Start Scan
LT-42DP8BJ_Digital.book Page 17 Wednesday, July 4, 2007 2:47 PM