English
- 9 -
Inserting the Batteries into the Remote
Remove the screw that secure the battery compartment
cover on the back side of the remote control first. Lift
the cover gently. Insert two
AAA
batteries. Make sure
the (+) and (-) signs match (observe correct polarity).
Place the cover back on. Then screw the cover back
on again.
Batteries should not be exposed to excessive heat
such as sunshine, fire or the like.
Connect Power
IMPORTANT
: The TV set is designed to operate on
220-240V AC, 50 Hz
socket. After unpacking, allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.
Antenna/Cable Connection
Connect the “aerial” or “cable TV” plug to the AERIAL
INPUT (ANT) socket located on the back of the TV.
Specifications
TV Broadcasting
PAL B/G D/K I
Receiving Channels
VHF (BAND I/III) - UHF
(BAND U) - HYPERBAND
Number of Preset
Channels
1000
Channel Indicator
On Screen Display
RF Aerial Input
75 Ohm (unbalanced)
Operating Voltage
220-240V AC, 50Hz.
Audio
Nicam Stereo
Audio Output Power
(WRMS.) (10% THD)
2 x 6 W
Power Consumption
75W
Weight (kg)
with stand without stand
12,50 kg
9,85 kg
TV Dimensions WxHxD
(with stand) (mm)
923 x 588 x 220
TV Dimensions WxHxD
(without stand) (mm)
923 x 544 x 79/98
Operation temperature
and operation
humidity:
0ºC up to 40ºC, 85%
humidity max
