19
IMPORTANT
PREPARE
USE
SETTING
TR
OUBLE?
ENGLI
S
H
If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak.
g
Consult your retailer
The “Missing or weak signal” message appears.
E
Initial setting is complete
Edit digital channels using “Edit PR”
g
If digital channel reception is poor
g
“When the digital channel reception is poor” (P. 19)
If analogue channel reception is poor
g
Some digital channels cannot be watched on this TV.
g
When the TV cannot find the digital channels
When the digital channel reception is poor
You can check the broadcast signal level of the channel you are watching using “Signal Check”.
g
WATCHING DIGITAL CHANNELS
P. 19
If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak.
g
Consult your retailer
WATCHING DIGITAL CHANNELS
P. 12 - 13
WATCHING DIGITAL CHANNELS
P. 22
Check the following points
z
Is the TV connected correctly to the aerial?
z
Change the direction of the indoor aerial.
z
Is there a digital channels transmission tower nearby?
g
Turn “Attenuator” to “On” (P. 45), since the radio waves are too strong.
z
“Attenuator” attenuates the radio waves of analogue broadcast as well as those of digital broadcast. If
some noise or snow appears when watching an analogue channel, please set “Attenuator” to “Off”
temporarily.
Note
z
Re-configure the initial settings
using “Factory Settings”
g
WATCHING DIGITAL CHANNELS
P. 19
Check the following points
z
Is the TV connected correctly to the aerial?
z
Change the direction of the indoor aerial.
z
Is there a digital channels transmission tower nearby?
g
Turn “Attenuator” to “On” (P. 45), since the radio waves are too strong.
z
“Attenuator” attenuates the radio waves of analogue broadcast as well as those of digital broadcast. If
some noise or snow appears when watching an analogue channel, please set “Attenuator” to “Off”
temporarily.
Note
LT-42ED91G_EN.book Page 19 Tuesday, April 29, 2008 9:31 AM