8
Please read P. 9 - 15 of this manual to set up your TV.
z
Stand and screws are also included. For details, refer to page 7.
(LT-32R10BU only)
䡵
Power requirements
z
Connect the power cord only to a 220 - 240 V, 50 Hz AC outlet.
䡵
When attaching the TV to the wall, use the optional JVC wall mounting unit
z
Consult a qualified technician.
z
See the included manual on mounting procedures.
z
JVC assumes no responsibility for damage due to improper mounting.
z
Mounting holes for wall mounting unit:
LT-32R10BU:
M5 x 4, 200 mm x 200 mm
Depth of screw hole is 7 mm from the surface of the TV.
LT-42R10BU:
M5 x 4, 400 mm x 200 mm
Depth of screw hole is 13 mm from the surface of the TV.
䡵
Installation requirements
z
Place the TV on a flat and stable location.
z
To avoid overheating, ensure the unit has ample room.
Use two “AAA/R03” dry cell batteries. Insert the batteries from the
-
end,
making sure the
+
and
-
polarities are correct.
Check accessories
Install your TV
Remote control
RM-C1932
“AAA/R03” Batteries
(For confirming the TV
works)
Cleaning cloth
(For details on using the
cleaning cloth, see P. 7.)
WARNING:
Batteries shall not be exposed to
excessive heat such as direct
sunshine, fire or the like.
Insert the batteries
200 mm
150 mm 50 mm
150 mm
50 mm
Getting started
LT-42R10BU_EN.book Page 8 Thursday, December 11, 2008 10:14 AM
