JVC LT-32DP8BG, Инструкция по эксплуатации

Страница: 61 / 123

56
IMPORTANT
PREPARE
USE
SETTING
TR
OUBLE?
EN
GL
IS
H
To start “Service Scan”.
z If you set “Scan” to “Network”, the “Network” menu appears. Select broadcasting stations from a list.
z If “Attenuator” (P. 46) is set to “On”, “RF Attenuator” menu will appear during initial setting. Select “On” or
“Off” and press “OK” button.
Signal Check
You can check the broadcast signal level of the channel you
are watching.
Signal level:
Poor < Acceptable < Excellent
z
To check another broadcast
channel
The “Channel” is the frequency of the digital broadcasting. It differs from the channel number
displayed on the TV.
Factory Settings
All registered digital channels are deleted and the DTV menu settings are initialised. Digital
channels are reregistered.
Mode Add
Start Scan
Scan completed! Store services?
Yes No
A
select “Start Scan”
B
start scanning
B
set
A
select “Yes”
ARD
Network Name
ZDF
RTL
C
set
A
select
B
registered / cancel
select
Exit MENU Navigate
Signal Check 14:00 05/05/2007
33
Service
Channel
Doku/KiKa
Info/3sat
ZDF
Signal : Excellent
Signal Quality
Signal Strength
Are you sure you want to delete the PR list and
reset all settings?
Yes No
Initial setting (P. 11) will start again.
A
select “Yes”
B
start
LT-42DP8BG.book Page 56 Wednesday, June 6, 2007 7:25 PM