- 26 -
6WDUWDXWRPDWLFVHDUFK"&XUUHQW35OLVW
ZLOOEHUHSODFHG
<HV
1R
This starts the automatic tuning process and
searches through all the available broadcast
frequencies for free-to-air channels.
%$&.
0(18
Previous channels will be replaced on auto-
matic search.
If no digital terrestrial television broadcasts
are found, the TV will display a message:
1RSURJUDPPHIRXQG
3OHDVHFKHFNDQWHQQDVLJQDO
2.
When
OK
button is pressed, following mes-
sage will appear on the right bottom side of
the screen:
35/LVW(PSW\
Manual Search:
This is for searching for digital channels on a
single broadcast frequency. The frequency
channel number (21-68) is entered in the box
at the top left of the screen and the received
signal level and signal quality can be observed
on the two bar graphs at the bottom. When
OK
is pressed, the TV searches that fre-
quency and display a list of the channels found.
Hint
The bar graphs of signal quality and signal
level give a good indication of whether any
channels are likely to be found. If only the
signal level graph shows a high value then it
is likely that an analogue channel occupies
that broadcast frequency. If the signal qual-
ity bar is high as well then it is a digital fre-
quency and digital channels will probably
be found.
Again, channels which duplicate those already
in the channel list are ignored. However, the
manual channel search will find all channels
on the broadcast frequency.
When either search is finished, press the
MENU key to return to normal broadcast view-
ing, to watch the new digital terrestrial televi-
sion channels found.
Factory Settings:
To reset the TV, highlight the Factory Settings
line in the menu and press
OK
. A warning
screen is displayed in case of accidental op-
eration.
$UH\RXVXUH\RXZDQWWRGHOHWHWKH35OLVW
DQGUHVHWDOOVHWWLQJV"
<HV
1R
Highlight the YES button with the or
key and press
OK
to erase all the channels
and settings. A message will be displayed on
the screen.
ENG-JVC (LT-26DY8ZJ)-26815W-RC RM C1899S-MB22-UK IDTV-(10052182)-50112533.p65
28.09.2007, 13:16
26
