ENGLISH
- 19 -
'XDO,,
If Dual II is selected by Remote Control.
Hyper Sound
By selecting Hyper Sound in sound menu or
by pressing the
button on your remote
control, Pseudo/Spatial effect can be turned
on or off.
In Mono transmission the left and right chan-
nels will be added at left channel and dummy
stereo effect will be introduced to end-user.
In stereo transmission it yields a phase differ-
ence between left and right channels.
Picture Mode
Picture mode OSD is displayed when BLUE
button is pressed. Picture mode can be
changed to Manual, Bright, Standard and Soft.
Sleep Timer
Sleep Timer mode OSD is displayed when
YELLOW button is pressed. See
page 15
for
detailed information.
Mute Indicator
It is placed in the upper right side of the screen
when enabled, and it stays there until it is dis-
abled.
To cancel mute, there are two alternatives; the
first one is by pressing the button, this vol-
ume is set to the preceding value, and the
second one is increasing or decreasing the
volume level.
Volume Bar
It is displayed in the lower middle of the screen.
When a volume command is received (press-
ing
+
or
-
by Remote Control or
Control panel at the right side of the TV) and
no menu is active, it stays on the screen for 3
seconds, after the last volume command or
until another command is received in between.
92/80(
EXT Modes
By pressing the
AV
button you can switch
your TV to EXT modes (except being in Tele-
text). Pressing this button consecutively will
switch the TV in one of the optional EXT
modes:
EXT-1, EXT-1S, EXT-1RGB, EXT-2
and
EXT-2S
.
In order to quit the EXT mode press any digit
buttons or
or
.
Zoom Modes
Zoom mode can be changed by pressing Red
button. You can change the screen size ac-
cording to the picture aspect ratio. Select the
optimum one from the following
ZOOM
modes:
Auto
,
4:3
and
16:9
.
AUTO
When a
WSS (Wide Screen Signalling)
sig-
nal, which shows the aspect ratio of the pic-
ture, is included in the broadcast signal or the
signal from an external device, the TV auto-
matically changes the
ZOOM
mode to
4:3
or
16:9
according to the
WSS
signal.
When the
AUTO
mode does not function cor-
rectly due to poor
WSS
signal quality or when
you want to change the
ZOOM
mode, change
to another
ZOOM
mode manually.
01-ENG-20710-17MB18-1861UK-(LT-20J50SE)-5008xxxx.p65
13.09.2006, 13:02
19
