JVC LT-20DJ5SFR, Инструкция по эксплуатации

Страница: 35 / 45

- 34 -
PC Mode
Installation
• Power off both Computer and the TV before
making any connections.
• Set your PC’s resolution correctly before
connecting to the TV. See the table in page
42 for supported modes.
• Use a D-SUB cable to connect the TV’s PC
input to the computer’s RGB output termi-
nal. If you want to listen to the sound from
the computer, use an audio cable to connect
the PC AUDIO IN to the computer’s sound
output terminal.
3LQ0LQL'6XE&RQQHFWRU
• Tighten the screws of the Display cable until
the connectors are fastened securely (fin-
ger-tighten only).
Main Menu in PC mode
Enter the main menu by pressing the “ MENU ”
button on the remote control.
3&0HQX
3&3LFWXUH3RVLWLRQ
3&3LFWXUH
6RXQG
3,33LFWXUH
6RXUFH
[
+N+]9+]
PC Picture Position Menu
In the Main menu, select “ PC Picture Posi-
tion ” using “ ” or “ ” button, then enter the
menu by pressing “ ” / “ ” or “ OK ” buttons.
Auto Position
If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
• Select Auto position item by using “ ” or
“ ” buttons.
• Press “
OK ” button.
• Press “ MENU ” button or “ BACK ” button to store
the value.
Warning: Auto position adjustment recom-
mended to be done with the full screen image
for the proper adjustment.
Horizontal Position
This item shifts the image horizontally to right
hand side or left hand side of the screen.
• Select
Hor. Position item by using “ ” or
“ ” button.
• Use “ ” or “ ” button to adjust the value.
• Press “
MENU ” button or “ BACK ” button to
store the value.
Vertical Position
This item shifts the image vertically towards
the top or bottom of the screen.
• Select
Ver. Position item by using “ ” or
“ ” button.
• Use “ ” or “ ” button to adjust the value.
• Press “
MENU ” button or “ BACK ” button to
store the value.
Dot Clock
Dot Clock adjustments correct interference
that appear as vertical banding in dot inten-
sive presentations like spreadsheets or para-
graphs or text in smaller fonts.
• Use “ ” or “ ” button to adjust the value.
Clock Phase
Depending on the resolution and scan fre-
quency that you input to the TV Set, you may
see a muddy or noisy picture on the screen. In
such a case you can use this item to get a
clear picture by trial and error method.
• Use “ ” or “ ” button to adjust the value.
01-ENG-20710-17MB16P-C1897S UK-(LT-20DJ5SFR)-(TVAVOK)-IDTV-10041701-50088870.p65 05.06.2006, 08:44 34