JVC LT-20B60SU, Руководство по обслуживанию

Страница: 35 / 72

ENGLISH - 19 -
on the required item. The selected mode
comes automatically on the screen.
6RXUFH79
79
(;7
(;7
(;76
(;7
(;76
3&
Other Features
TV Status
Programme Number , Programme Name (or
EXT ), (they are displayed on the upper left of
the screen). The sound indicator is displayed
with them too. They are displayed after
programme change for 3 seconds.
Sound Indicator
The alternatives of the indicator are Mono, Ste-
reo, Dual I and Dual II. This indicator is dis-
played under the programme number indica-
tor on the screen. “ I-II ” button is used to select
Mono or Stereo, or Dual I or Dual II.
0RQR
In Mono broadcast or in forced-mono (for ste-
reo broadcast).
6WHUHR
In Stereo broadcast.
'XDO,
If dual broadcast detected. Dual I is selected
in default and also can be selected after Dual
II by Remote Control.
'XDO,,
If Dual II is selected by Remote Control.
Hyper Sound
By selecting Hyper Sound in sound menu or
by pressing the “
” button on your remote
control, Pseudo/Spatial effect can be turned
on or off. In Mono transmission the left and
right channels will be added at left channel
and dummy stereo effect will be introduced to
end-user.
In stereo transmission it yields a phase differ-
ence between left and right channels. Hyper
Sound selection will be displayed on the
screen when the TV Status button is pressed
or programme is changed.
Picture Mode
Picture mode OSD is displayed when BLUE
button is pressed. Picture mode can be
changed to standard, soft and bright.
Sleep Timer
Sleep Timer mode OSD is displayed when
YELLOW button is pressed.
The Sleep Timer is used to turn the TV off after
a defined period of time after selecting this
item. The timer can be programmed between
Off and 120 minutes in steps of 10 minutes.
(Off, 010, 020, 030, 040, ... , 120)
If sleep timer is activated, at the end of the
selected time, the TV goes automatically to
stand-by mode.
Mute Indicator
It is placed in the upper middle of the screen
when enabled, and it stays there until it is dis-
abled.
To cancel mute, there are two alternatives; the
first one is by pressing the “ ” button, this
volume is set to the preceding value, and the
second one is increasing or decreasing the
volume level.
01-ENG-2025-17MB08P-1861UK-(LT-20B60SU)_26032005.p65 11.04.2005, 10:51 19