7
EN
English
PREPARATION FOR USE
Antenna Connection
1)
Connect an RF cable (commercially available) to
(Aerial)
input jack at the rear of this unit.
2)
Plug this unit into an AC outlet.
3)
The STAND BY/POWER indicator on the front panel lights
red, then press
[
(standby-on)]
to turn on the unit.
External Connection
[HDMI CONNECTION]
HDMI connection offers the highest picture quality. HDMI
(High Definition Multimedia Interface) transports high
definition video and multi-channel digital audio through a single
cable.
Connect the HDMI output jack of your video device and the
HDMI-IN jack of the unit. Use an HDMI cable (commercially
available).
[SCART CONNECTION]
Scart connection offers better picture quality.
Connect the scart jack of your video device and the SCART jack
of this unit. Use a scart cable (commercially available).
Note:
If you like to connect a active DVB-T antenna, the
antenna must have its own power supply.
It is not possible to power the antenna from the TV.
To
(Aerial) input jack
Rear of this unit
RF cable (not supplied)
VHF/UHF
MIXER
VHF
UHF
Dear Customer,
By connecting an HDMI cable to your JVC LCD TV, you have
to use only a certified HDMI cable to guarantee a sufficient
immunity against parasitic frequency radiation.
A certified HDMI cable can be identified by the HDMI logo
on the cable or the cable package.
Note:
• This unit accepts 480i / 480p / 576i / 576p / 720p /
1080i video signals and 32 kHz / 44.1 kHz / 48 kHz
audio signals.
• This unit accepts only 2 channel audio signals
(LPCM).
• You need to select “PCM” for the digital audio
output of the device you connect. Make sure the
device outputs the digital audio. Audio sometimes
makes no sound if you select “Bitstream”, etc.
HDMI OUT
Rear of this unit
HDMI cable
(not supplied)
VIDEO
SCART
L
AUDIO
R
VIDEO
S-VIDEO
P
AD
ONE
scart cable (not supplied)
Rear of this unit
