18
The following pages gives you a brief description of each button’s function.
This remote can also control up to four other devices. See pages 51 - 52.
Remote Control
TIMER
Allows you to set the TV to turn on and set the TV to turn off
automatically after a set amount of time and channel of your choice.
On Timer / Input / Sleep Timer
Notes:
• If you set the interval of
On Timer
by pressing the
¥
buttons,
select channel at Input and press
OK
.
• After you set
On Timer
and turn off the TV, power lamp lights.
• You can check the remaining time of
On Timer
by displaying
this menu again.
• You can set the interval of
Sleep Timer
by pressing the
¥
buttons.
• 60 seconds before the TV turns off, a message will appear and it
will count the remaining time.
• See page 50, “On Timer using iPod”.
POWER
Turns the TV on or off.
MODE
TV
STB
VCR
DVD AUDIO
Switch between “TV / STB / VCR / DVD / AUDIO devices.
See page 51.
V1
V2
V3
V4
V5
Switch between devices connected to Video-1, 2, 3, 4 and 5. For
V4 (Video-4) and V5 (Video-5) you must select the signal input type
fi
rst (ie. composite, S-Video, or component). To do so, you need
to press the
V4
or
V5
button until the correct type is highlighted.
Select “
Composite 1
” for composite video signal input, “
S-Video
”
for S-video signal input, or “
Component 1
” for component video
signal input. Select “
Composite 2
” for composite video signal input
or “
Component 2
” for component video signal input. Select
PC
for
PC signal input.
1
2
3
4
5
6
7
8
9
0
TUNE
TV
Change channels. Input remote codes. See page 51.
TUNE
Lets you decide the input channel and select it. After pressing the
remote 0 - 9 buttons, press
TUNE
.
0 h 0 m
0 - 0
0 min
Timer
On Timer
Input
Sleep Timer
LCT2518-002C-A.indd 18
LCT2518-002C-A.indd 18
6/29/09 3:46:19 PM
6/29/09 3:46:19 PM
