JVC KY-PZ200 Series, Инструкция по эксплуатации

Страница: 10 / 52

.
Para Brasil
Informação sobre eliminação de
baterias
Este produto não deverá ser eliminado
como lixo doméstico em geral.
Devolva a bateria velha ao comerciante
ou para a rede autorizada, para que seja
devolvida ao fabricante ou importador.
A reciclagem e eliminação de lixo em
uma maneira adequada, ajudarão para
preservar recursos, prevenindo, ao
mesmo tempo, contra efeitos prejudiciais
sobre a nossa saúde e o meio ambiente.
o
Para Retirar a Bateria Recarregável
Pressione botão e puxe a bateria para fora.
.
Consult your dealer as special technique is
required when installing this product. Ensure that
the fixing screws or nuts are tightened securely,
otherwise, the unit may fall off.
Mounting to a firm place
As the unit contain parts rotating at high speed,
mount it on a firm place with sufficient strength to
support the vibration and weight of the unit.
Mass : Approx. 1.7 k
g
T
Approx. 1.5 k
g
U S
If the strength is weak, the vibration will cause
fuzzy images on the monitor screen. In the worst
scenario, the camera may even fall off and hit
somebody, resulting in serious accidents.
Mount the camera correctly
When mounting the unit to the ceiling, make sure
to use a ceiling mounting bracket.
Be sure to connect the fall prevention wire (sold
separately) and tighten the fixing screws or nuts
securely.
Using the correct power and voltage
To supply power to this unit, use a DC 12 V or
PoE (IEEE802.3af) power. Make use of the
correct voltage.
Use the supplied AC adapter for the DC 12 V
power supply. Do not use the supplied AC
adapter on other devices.
Inspect the unit regularly
Screws may be loosened due to vibration or
deterioration of the mounting section. Perform
regular inspections for loosened screws and
check whether there is any danger of the unit
falling off.
Do not hang on this product, shake it, or hang
objects over it. Applying an excessive load may
cause the product to fall off and result in
accidents.
Do not modify this product. It may result in
accidents.
Do not place any object inside the product.
Placing a metallic or inflammable object may
cause a fire or shock hazard.
10
Safety Precautions
Getting Started