JVC KY-PZ100BE, Инструкция по эксплуатации

Страница: 59 / 116

A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(
A
P59 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
(
A
P59 [Audio Set Item] )
Video Set Item
HDMI/SDI Out
For setting the terminal to output the video.
[Setting Values:
R
HDMI+SDI, SDI, HDMI]
9
Resolution
For selecting the resolution of video output from the
[HDMI] terminal or [SDI OUT] terminal according to
the monitor to be connected.
0
When SDI or HDMI+SDI is selected
1080p mode: 1080/60p, 1080/50p, 1080/60i,
1080/50i, 1080/30p, 1080/25p
720p mode: 720/60p, 720/50p
0
For HDMI
1080p mode: Auto, 1080/60p, 1080/50p,
1080/60i, 1080/50i, 1080/30p, 1080/25p
720p mode: Auto, 720/60p, 720/50p
Memo :
0
The selectable options vary according to the
setting in [System]
B
[System Mode].
0
Cross conversion output is not possible.
9 HDMI Color
0
For setting the color format of HDMI signals.
0
This item is selectable when [HDMI/SDI Out] is
set to “HDMI” or “HDMI+SDI”.
[Setting Values: RGB,
R
Auto]
9 HDMI Enhance
0
For setting the color range of HDMI signals.
When connecting to a PC monitor, set this to
“On”.
0
This item is selectable when [HDMI/SDI Out] is
set to “HDMI” or “HDMI+SDI”.
[Setting Values: On,
R
Off]
9 HDMI TC
For setting whether to superimpose time code to
the [HDMI] terminal.
[Setting Values: On,
R
Off]
Memo :
0 When [Main Menu]
B
[A/V Set]
B
[Video Set]
B
[HDMI/SDI Out] is set to “SDI”, [HDMI TC] is
fixed at “Off” and cannot be selected.
0
Set to “Off” if connecting to a device that does
not support HDMI TC.
3G-SDI Mapping
For setting the 3G-SDI mapping structure.
[Setting Values:
R
Level A, Level B]
Memo :
0
Available when [Main Menu]
B
[System]
B
[Resolution] is set to “1080/60p” or “1080/50p”.
0
When [HDMI/SDI Out] is set to “HDMI”, this item
appears as “---” and cannot be selected.
Audio Set Item
Audio
For setting whether to input audio sound.
[Setting Values: On,
R
Off]
Input Mode
For setting the audio input mode.
[Setting Values:
R
Unbalanced Stereo, Balanced
Mono]
Input Select
Select the audio sound to input to the [AUDIO IN]
terminal.
[Setting Values:
R
Line, Mic, Mic +2.5 V]
Audio Gain
For setting the audio input level.
[Setting Values:
R
High, Low]
Equalizer
For setting the sound quality.
[Setting Values: Speech Enhancement, Low Cut,
R
Off]
Test Tone
For specifying whether to output the audio test
signals (1 kHz) during color bar output.
[Setting Values: On,
R
Off]
A/V Set Menu
59
Menu
Display and
D
etailed
S
etti
ngs