6
FY-F560 power must be switched off before mounting
the card.
1.
Remove 2 screws
Å
from the rear of the camera
and take out the slot cover.
2.
Insert this SDI output card into the slot at the rear of
the camera and secure it by screwing back the 2
screws
Å
which were taken out earlier in the above-
mentioned step
1.
.
SDI OUT
Slot
Screw
Å
This card
Screw
Å
Slot cover
Note to be taken after mounting KY-F560
To avoid causing malfunction, please do not touch the
SDI output terminal except when connecting cable to it.
SDI OUT
SDI
output
terminal
Mounting this card on KY-F560 Camera
䡵
By inserting this card into JVC’s color video camera
KY-F560, camera images could be output as serial
digital video signal (SMPTE 259M compliant).
SDI OUT
SDI output
terminal
Thank you for purchasing the KA-F5601U SDI output card.
Note
Ensure that the SDI output card is inserted all the
way in.
KA-F5601U_02-07
04.4.8, 0:04 PM
6
