2
Connecting the external components in series
When connecting the external components, refer also to the manuals supplied for the components and adapter.
You can connect the following components through the various JVC adapters to the expansion port.
• Connection cords may need to be purchased separately.
Component
Adapter
Model name
Bluetooth device
Bluetooth adapter
KS-BTA200
Portable audio player with line output jacks
Line input adapter
KS-U57
Portable audio player with 3.5 mm stereo mini jack
AUX input adapter
KS-U58
Black
Fuse block
Ignition switch
Blue (white stripe)
Red
Yellow *
3
To the metallic body or chassis of the car
To an accessory terminal
To a live terminal (constant 12 V)
To the automatic antenna if any (250 mA max.)
White
White (black stripe)
Gray
Gray (black stripe)
Green
Green (black stripe)
Purple
Purple (black stripe)
Y-connector *
1
Y-connector *
1
Remote lead
Remote lead
To the blue (white stripe) lead of
the unit
Rear speakers or subwoofer (Make the <L/O MODE> setting accordingly,
see page 24 of the INSTRUCTIONS.)
Rear ground terminal
15 A fuse
Antenna input
Front speaker (left)
Front speaker (right)
Rear speaker (left)
Rear speaker (right)
ELECTRICAL CONNECTIONS
Reset the unit.
JVC Amplifier
JVC Amplifier
Connecting the external amplifier or subwoofer
To the remote lead of other equipment (200 mA max.)
Blue
IMPORTANT
: A custom wiring harness (separately purchased) which is suitable for your car is recommended for connection between the unit and your car.
• Consult your JVC car audio dealer or a company supplying kits for details.
D
Power cord
*
1
Not supplied for this unit.
*
2
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint.
*
3
Before checking the operation of this unit prior to installation, this lead must be connected; otherwise, the power cannot be turned on.
*
4
To use these components, set the external input setting correctly (see page 25 of the INSTRUCTIONS).
A
KS-BTA200
B
*
4
KS-U57 / KS-U58
To disconnect...
Expansion port of the unit
Caution:
Before connecting the external components, make sure that the unit is turned off.
Expansion port
Steering wheel remote input
To the blue (white stripe) lead of
the unit
Signal cord *
1
Signal cord *
1
Front speakers
Orange with white stripe
To car light control switch
Install_KW-XR614_009A_f.indd 2
Install_KW-XR614_009A_f.indd 2
2/1/10 10:22:00 AM
2/1/10 10:22:00 AM