background image

(No.MA471<Rev.005>)1-7

1.8

Important for laser products

1.CLASS 1 LASER PRODUCT 

2.CAUTION : 

   (For U.S.A.) Visible and/or invisible class II laser radiation
   when open. Do not stare into beam.
   (Others) Visible and/or invisible class 1M laser radiation
   when open. Do not view directly with optical instruments. 

3.CAUTION : 

Visible and/or invisible laser radiation when

   open and inter lock failed or defeated. Avoid direct
   exposure to beam.

4.CAUTION : 

This laser product uses visible and/or invisible  

   laser radiation and is equipped with safety switches which 
   prevent emission of radiation when the drawer is open and 
   the safety interlocks have failed or are defeated. It is 
   dangerous to defeat the safety switches.

5.CAUTION : 

If safety switches malfunction, the laser is able

   to function. 

6.CAUTION : 

Use of controls, adjustments or performance of  

   procedures other than those specified here in may result in 
   hazardous radiation exposure. 

REPRODUCTION AND POSITION OF LABELS and PRINT

!

Please use enough caution not to 

see the beam directly or touch it 

in case of an adjustment or operation

check.  

WARNING  LABEL and PRINT

Содержание KW-XG56TU





























Отзывы: