background image

24

ENGLISH

OTHER MAIN FUNCTIONS

Changing general settings (PSM)

You can change the following settings for this unit by using the PSM (Preferred Setting Mode)
control.
• PSM CLOCK (H/M): Adjusts the built-in clock (see below).
• PSM BEEP: Turns on or off the key-touch tone (see page 25).
• PSM DIMMER: Selects the dimmer mode (see page 25).
• PSM AREA: Selects the area you use this unit — when using this unit in an area other than

North or South America (see page 11).

• PSM LINE IN: Selects the external component to use (see page 26).
• PSM DEMO: Turn on or off the display demonstration (see page 26).

Setting the clock

After installation, set the built-in clock correctly.

Press SEL for more than 2 seconds.

One of the PSM items appears on the display.

If “PSM CLOCK H” does not appear, press 

¢

 

 or 

4

 

 repeatedly until it appears.

Turn the control dial to adjust the hour.
Press 

¢

 or 

4

 until “PSM CLOCK M” appears on the display.

Turn the control dial to adjust the minute.
Press SEL again to finish the setting.

\

\

The minute digit starts flashing.

The hour digit starts flashing.

Control dial

SEL

¢

4

EN24-26.KW-XC770[J]/1

99.11.24, 3:28 PM

24

Содержание KW-XC770







































Отзывы: