Menu item
Selectable setting (Initial: [XX])
Display
LCD Type
[Negative]
: Negative pattern of the display.
Positive
: Positive pattern of the display.
Auto
: Positive pattern will be selected during the day*5, while negative will
be selected during the night*5.
Contrast
Level 01 — Level 15 [Level 09]
: Adjusts the contrast of the display to
make indications clear and legible.
EQ/DSP
For settings,
'
page 23.
Audio
Fad/Bal
*6*7
R6 — F6
[0]
: Press
/
to adjust the front and rear speaker output balance.
L6 — R6
[0]
: Press
/
to adjust the left and right speaker output balance.
Loud
(Loudness)
Loud1/ 2/ 3
: Boosts low and high frequencies to produce a well-balanced
sound at low volume levels.
[Off]
: Cancels.
Volume Adjust
Level -5 — Level +5
[Level 0]
: Presets the volume adjustment level of
each source, compared to the FM volume level. Before adjustment, select
the source you want to adjust. (
“
FIX
”
appears if
“
FM
”
is selected.)
Subwoofer On/
Off
[On]
: Turns on the subwoofer output.
Off
: Cancels.
Subwoofer
Level
*8
00 — 10
[05]
: Adjusts the subwoofer output level.
Subwoofer
Phase
*8
[0 Deg]
(normal)/
180 Deg
(reverse): Selects the subwoofer phase.
X’over HPF/LPF
For settings,
'
page 27.
Beep
(Keytouch tone)
[On]
/
Off
: Activates or deactivates the keypress tone.
Amplifier Gain
Off
: Deactivates the built-in amplifier.
Low Power
: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[High Power]
: The maximum volume level is 50.
Tuner
SSM
For settings,
'
page 6. (Displayed only when the source is
“
FM
”
or
“
HD
Radio
”
.)
Area Change
(Frequency
tuning interval)
[US]
: For North/Central/South America, AM/FM intervals: 10
kHz/200
kHz.
EU
: For any other areas, AM/FM intervals: 9
kHz/50
kHz.
SA
: For some South American countries, AM/FM intervals: 10
kHz/50
kHz.
IF Band
(Intermediate
frequency band)
[Auto]
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
Sirius ID
The 12-digit SIRIUS identification number appears on the display. (Displayed
only when SIRIUS Satellite Radio is connected.)
Blend Hold
For settings,
'
page 8. (Displayed only when the source is
“
HD Radio
”
.)
Stereo/Mono
Displayed only when the source is
“
FM
”
or
“
HD RADIO
”
.
[Stereo]
: Enables stereo FM reception.
Mono
: Improves the FM reception but stereo effect will be lost.
Radio Timer
For settings,
'
page 7.
*5
Depends on the <Dimmer Set> setting.
*6
If you are using a two-speaker system, set the fader level to “0”.
*7
This adjustment will not affect the subwoofer output.
*8
Displayed only when <Subwoofer On/Off> is set to <On>.
Menu operations
ENGLISH
ޓ
|
29
2012/3/22
ޓ
10:43:57
KW-R900BT_J_EN
