Menu item
Selectable setting (Initial: [XX])
AUDIO
SUB. W
*5
(Subwoofer)
OFF
: Cancels.
[ON]
: Turns on the subwoofer output.
SUB.W LPF
*6
(Subwoofer low-
pass filter)
LOW 55Hz
/
MID 85Hz
/
[HIGH 120Hz]
: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL
*6
(Subwoofer level)
00 — 08
[08]
: Adjusts the subwoofer output level.
HPF
*6
(High-pass filter)
LOW 100Hz
/
MID 120Hz
/
HIGH 150Hz
: Activates the High Pass Filter.
Audio signal with frequencies lower than 100 Hz/120 Hz/150 Hz are cut off
from the front/rear speakers.
[OFF]
: Deactivates. (All signals are sent to the front/rear speakers.)
BEEP
(Keytouch tone)
[ON]
/
OFF
: Activates or deactivates the keypress tone.
TEL MUTING
*7
(Telephone
muting)
ON
: Mutes the sounds of the unit while using the mobile phone system
(not connected through Bluetooth adapter KS-BTA100).
[OFF]
: Cancels.
AMP GAIN
(Amplifier gain)
LOW POWER
: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[HIGH POWER]
: The maximum volume level is 50.
TUNER
SSM
For settings,
'
page 6. (Displayed only when the source is
“
FM
”
.)
MONO
(Monaural mode)
Displayed only when the source is
“
FM
”
.
[OFF]
: Enables stereo FM reception.
ON
: Improves the FM reception but stereo effect will be lost.
IF BAND
(Intermediate
frequency band)
[AUTO]
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
WIDE
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
RADIO TIMER
For settings,
'
page 6.
IPOD SWITCH
(iPod/iPhone control)
[HEAD MODE]
/
IPOD MODE
/
EXT MODE
:
For settings,
'
page 8. (Displayed only when the source is
“
USB-IPOD
”
.)
(KW-R500 only)
SRC SELECT
AM
*8
[ON]
/
OFF
: Enables or disables
“
AM
”
in source selection.
F-AUX
*8
(Front auxiliary
input)
[ON]
/
OFF
: Enables or disables
“
F-AUX
”
in source selection.
R-AUX
*8
(Rear auxiliary
input)
ON
/
OFF
: Enables or disables
“
R-AUX
”
in source selection.
[BT ADAPTER]
: Select if the rear auxiliary input jack is connected to the
Bluetooth adapter, KS-BTA100 (
'
page 9). The source name will be
changed to
“
BT AUDIO
”
.
*5
Displayed only when <L/O MODE> is set to <SUB.W>.
*6
Displayed only when <SUB.W> is set to <ON>.
*7
To activate this function, select <SRC SELECT>
#
<R-AUX>
#
<R-AUX ON>/<R-AUX OFF>.
*8
Displayed only when the unit is in any source other than the corresponding source “AM/
F-AUX/R-AUX/BT AUDIO”.
Menu operations
ENGLISH
ޓ
|
13
2011/12/5
ޓ
17:9:10
KW-R500_U_EN
