JVC KW-M150BT, Инструкция по эксплуатации

Страница: 17 / 28

17 English |
Controlling Audio
Continued on the next page...
You can adjust various settings such as audio
balance or subwoofer level.
1
Press the <EQ> button.
2
See the below for each operation method.
Controlling General Audio
1
Press the <EQ> button.
2
Touch [Fader / Balance].
3
Set each item as follows.
[Fader Balance]
Balance
[
U
] [
T
]
Adjust the left and right volume
balance.
15 (right) to 15 (left)
Fader
[
R
] [
S
]
Adjust the front and rear volume
balance.
15 (front) to 15 (rear)
[INITIALIZE]
To clear the adjustment.
[Listening Position]
[ . ]
Select a listening position from “Front
Left”, “Front All”, “Front Right”, and
“Middle”.
[INITIALIZE]
To clear the adjustment.
Equalizer Control
1
Press the <EQ> button.
2
Touch [Equalizer].
3
Set each item as follows.
1
2
3
4
1
You can select frequency bar and adjust its level.
(-9 to +9)
• The adjustments are stored.
2
To recall the preset equalizer curve.
3
Recalls the memorized EQ curve.
4
Initialize the current EQ curve.
Speaker / X’Over setup
1
Press the <EQ> button.
2
Touch [Speaker / X’Over].
3
Touch the speaker to set up.
4
Set each item as follows.
Mode
[OFF], [ON]
[ON] :
Filter adjustment.
[OFF] :
Turns off the filter.
Slope
[
R
] [
S
]
Set a crossover slope.
Frequence
[
R
] [
S
]
• High Pass Filter adjustment. (When
Front or Rear is selected)
• Low Pass Filter adjustment. (When
Subwoofer is selected)
Level
[
R
] [
S
]
Adjust the gain of the front speaker,
rear speaker, or subwoofer.
Phase
Inversion
Set the phase of subwoofer output.
[
] to shift the phase 180 degrees.
(When Subwoofer is selected)
[INITIALIZE]
To clear the adjustment.
Controlling Audio
19KWM_M_Ref_1En.indd 17 2019/07/16 8:53