43
ENGLISH
Setting menu items
• You cannot change <
Audio
> settings (except <
Amplifier Gain
>) when the AV source is turned off.
Menu item
Selectable setting/item
Initial:
Underlined
Audio
Fader/Balance
Fader
: Adjust the front and rear speaker output balance.
♦
F6
to
R6
; Initial
0
• When using a two-speaker system, set the fader to the center (
0
).
Balance
: Adjust the left and right speaker output balance.
♦
L6
to
R6
; Initial
0
Press [
5
/
∞
/
2
/
3
] or drag [
] to adjust.
• To clear the adjustment, press [
Center
].
Equalizer
Change the sound mode or adjust and store the equalization for each source.
(
☞
page 36)
♦
Flat/Natural/Dynamic
/
Vocal Boost
/
Bass Boost
/
Vibrant
/
User
Loudness
You can activate/deactivate the loudness function.
♦
Off
♦
On
: Cancels.
: Boost low and high frequencies to produce a well-
balanced sound at a low volume level.
Crossover
Adjust the cross over frequency. (
☞
page 37)
Volume Adjust
Adjust and store the auto-adjustment volume level for each source. (For
discs, the adjustment is stored for each of the following categories: DVD/
DVD-VR, VCD/CD, and DivX/MPEG1/MPEG2/MP3/WMA/WAV.) The volume
level will automatically increase or decrease when you change the source.
♦
–15
to
+06
; Initial
00
Amplifier Gain *
You can change the maximum volume level of this unit.
♦
High
: VOL 00 to 50
♦
Low
: VOL 00 to 30
(Select this if the peak power of the speakers is less
than 50 W.)
♦
Off
: Deactivates the built-in amplifier
• If you change this setting from <
High
>/<
Off
> to <
Low
> while the
volume level is set higher than the maximum level of <
Low
>, the unit
automatically lowers the volume level to “VOL 30”).
*
You can change the setting only when the AV source is turned off.
EN_KW-AVX740JJW.indb 43
EN_KW-AVX740JJW.indb 43
11/01/10 19:14
11/01/10 19:14