18
• This unit can play back files recorded in VBR (variable
bit rate).
Files recorded in VBR have a discrepancy in the
elapsed time indication.
• This unit cannot play back the following files:
– MP3 files encoded with the MP3i or MP3 PRO
format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with a lossless, professional, or
voice format.
– WMA files which are not based upon Windows
Media® Audio.
– WAV files encoded using MS-ADPCM.
– Files which have data such as AIFF, ATRAC3, etc.
Setup menu
• When the language you have selected is not recorded
on a file, the original language is automatically
used as the initial language. In addition, the initial
language settings will not work as you had set due to
the internal programming.
• When you select “16:9” for a picture whose aspect
ratio is 4:3, the picture changes slightly due to the
process for converting the picture width.
• Even if “4:3 PAN SCAN” is selected, the screen size
may become “4:3 LETTERBOX” for some files.
When using the cigarette lighter adapter...
• When you turn the ignition switch off, the power of
the unit also turns off. Next time you turn the power
on, playback starts from the beginning of the disc.
• When the ignition switch is turned off, you cannot
operate the unit. To eject the disc, turn on the
ignition switch.
• If the unit does not work correctly, turn off the power
then on again.
On-screen guide icons
During playback, the following guide icons may
appear for a while on the monitor.
:
Playback
:
Pause
: DVD-Video/VCD: Forward slow motion
: DVD-Video: Reverse slow motion
: Forward search
: Reverse search
DVD: The following icons appear at the beginning of
a scene containing:
: Multi-subtitle languages
: Multi-audio languages
: Multi-angle views
About sounds reproduced through the
rear terminals
•
Through the analog terminals (Speaker out/
LINE OUT):
A 2-channel signal is emitted. When
playing a multi-channel encoded disc, multi-
channel signals are downmixed. (AUDIO—DOWN
MIX: see page 16.)
•
Through the DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, MPEG
Audio) are emitted through this terminal. (For
more details, see table on page 19.)
To reproduce multi-channel sounds such as Dolby
Digital, and MPEG Audio, connect an amplifier or
a decoder compatible with these multi-channel
sources to this terminal, and set “DIGITAL AUDIO
OUTPUT” accordingly. (See page 16.)
EN14-19_KV-DV50_004A_f.indd 18
EN14-19_KV-DV50_004A_f.indd 18
5/14/07 11:33:20 AM
5/14/07 11:33:20 AM
