KS-USB10
ENGLISH
The USB READER/WRITER utilizes USB 2.0 interface to bring you convenient and high-speed access to an SD Memory
Card. It Supports Mass Storage Class Drive; no additional driver needed under Windows ME, 2000, and XP.
Note:
To use the unit on Windows 98 or 98SE, you need to download and install the driver software from the site:
http://www.jvc.co.jp/english/download/index-e.html
Operation
1
Insert the unit into the USB port on your PC.
The LED indicator on the unit turns on.
Note:
Use the supplied USB cable for connection if necessary.
2
Insert the SD Memory Card into the slot on the unit.
To PC’s USB port
LED indicator
PC
:
PC/AT compatible computer with USB support
Windows 98/98SE/ME/2000/XP
Supported Card
: SD Memory Card (Up to 512 MB)
Interface
:
USB 2.0/1.1
Power
:
DC+5.0V directly from USB port (bus powered)
Environment
:
Operating temperature: 0˚C to +55˚C (32˚F to 131˚F)
Storage temperature: –20˚C to +55˚C (–4˚F to 131˚F)
Humidity: 90% RH (max. without condensing)
Caution:
The LED indicator on the unit flashes
while reading/writing the data on the
SD Memory Card.
Do not insert or extract the card while
the indicator is flashing. Besides, SD
Memory Card must be taken off before
insertion or removal of the unit.
We do not guarantee data even if the
data are lost while using this product.
Microsoft Windows, Windows 98, Windows 98SE, Windows ME, Windows
2000, and Windows XP are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
SD logo is a trademark.
Specifications
KS-USB10
USB READER/WRITER User’s Guide
Guía del usuario del LECTOR/ESCRITOR USB
Guide d’utilisation du LECTEUR/ENREGISTREUR USB
LVT1355-001B
[J]
EN, SP, FR
CAUTION
Changes or modifications not approved by JVC could void the user’s authority
to operate the equipment.
For the main unit:
Declaration of Conformity
Model Number:
KS-USB10
Trade Name:
JVC
Responsible Party: JVC Americas Corp.
Address:
1700 Valley Road, Wayne New Jersey 07470
Telephone Number: 973-317-5000
This device complies with Part 15 of FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
LVT1355-001B.p65
05.1.7, 7:45 PM
1
