1-14 (No.49855)
3.2.10 Disassembling the flywheel assembly (F)
(1) Push and turn counterclockwise the spring holder
(F)
to re-
lease the three joints
p
on the bottom of the flywheel.
(2) The spring holder
(F)
, the TU spring and the friction gear
play come off.
(3) Remove the polywasher and felt.
3.2.11 Disassembling the flywheel assembly (R)
(1) Push and turn clockwise the spring holder
(R)
to release
the three joints
q
on the bottom of the flywheel.
(2) The spring holder
(R)
, the FF spring and the friction gear
FF come off.
(3) Remove the polywasher and the felt.
3.2.12 Removing the reel board
(1) Remove the two screws
C
attaching the reel board.
(2) Move the reel board in the direction of the arrow to release
the joint
r
.
(3) Unsolder the wires if necessary.
CAUTION:
When reattaching, confirm operation of the MODE
switch and the ST-BY switch.The mode position be-
tween EJECT and ST-BY is optimum for reattach-
ing.Connect the card wire extending from the reel board
to the FFC pad before reattaching the reel board.
Fig.19
Fig.20
Fig.21
Fig.22
Flywheel
assembly (F)
Flywheel
assembly (R)
Joints p
Joint p
Joints q
Joint q
Polywasher
Spring holder (F)
TU spring
Polywasher
Spring holder (R)
FF spring
Friction gear play
Friction gear FF
Flywheel assembly (F)
Flywheel assembly (R)
Felt
Felt
FFC pad
Joint r
Reel board
C
C
FFC pad
CT-1 switch
ST-BY switch
Soldering
MODE switch
Содержание KS-LH60R
Страница 24: ...1 24 No 49855 SECTION 5 TROUBLE SHOOTING This service manual does not describe TROUBLE SHOOTING ...
Страница 52: ...3 6 Grease point 1 2 FG 84M CFD 409 EP 56 SW 474B SW 902 MEN 223 MEA 512R CFD 250H 1 2 3 5 6 4 ...
Страница 53: ...3 7 Grease point 2 2 11 12 7 21 24 27 28 46 44 41 62 33 35 13 10 42 39 ...