ENGLISH
32
To change the display information while
tuning in to an ensemble
Normally service name is shown on the display.
If you want to change the display information, press
DISP (display).
Each time you press the button, the following
information appears on the display for a while.
To tune in to a particular ensemble
without searching:
1 Press and hold DAB (FM/AM) to select DAB
tuner as the source.
2 Press DAB (FM/AM) repeatedly to select the
DAB band (DAB1, DAB2 or DAB3).
3 Press and hold
¢
or
4
for more
than 1 second.
4 Press
¢
or
4
repeatedly until the
ensemble you want is reached.
• If you hold down the button, the frequency
keeps changing until you release the button.
To restore the FM/AM tuner
Press and hold DAB (FM/AM) again.
Storing DAB services in
memory
You can preset up to 6 DAB services in each
DAB band (DAB1, DAB2 and DAB3) manually.
1
Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
2
Select the DAB band (DAB1, DAB2
or DAB3) you want.
Each time you press the
button, the DAB band
changes as follows:
3
Tune in to an ensemble you want.
4
Select a service you want to listen to.
1
Press MODE to enter the
functions mode while
listening to the DAB tuner.
This unit enters the
functions mode.
2
Press
¢
or
4
,
while still in the functions
mode to select a service.
Clock time
Service name
Ensemble name
Band/Preset number
Frequency
Channel number
FM/AM
DAB
FM/AM
DAB
DAB1
DAB2
DAB3
4
¢
FM/AM
DAB
MODE
4
¢
2
Press
¢
or
4
,
while still in the functions
mode to select a service.
4
¢
EN30_33KSFX772R_FX732R[E]f.pm5
12/14/01, 8:27 PM
32