(No.MA094B)1-7
3.1.7 Removing the cassette mechanism assembly
(See Fig.7)
• Prior to performing the following procedure, remove the front
panel assembly, bottom cover, front chassis assembly, heat
sink, rear panel and main board.
(1) Remove the four screws
H
attaching the cassette mecha-
nism assembly from the top chassis.
Fig.7
3.1.8 Removing the head amplifier board
(See Fig.8)
• Prior to performing the following procedures, remove the front
panel assembly, bottom cover, front chassis assembly, heat
sink, rear panel, main board and cassette mechanism assem-
bly.
(1) Disconnect the wire from CJ901 on the head amplifier
board.
(2) Remove the one screw
J
attaching the head amplifier
board.
(3) Move the head amplifier board in the direction of the arrow
to release the two joints
f
, the head amplifier board can be
removed.
Fig.8
3.1.9 Removing the relay board
(See Fig.9)
• Prior to performing the following procedures, remove the front
panel assembly, bottom cover, front chassis assembly, heat
sink, rear panel, main board and cassette mechanism assem-
bly.
(1) Disconnect the wire from
CP722
on the relay board.
(2) Remove the one screw
K
attaching the relay board.
(3) Move the relay board in the direction of the arrow to release
the joint
g
, the relay board can be removed.
Fig.9
H
H
H
H
Top chassis
Cassette mechanism assembly
J
CJ901
Head amplifier board
Joint
f
Joint
f
To head relay board
K
CP722
Relay board
Joint
g
Содержание KS-F185
Страница 21: ...3 3 Main board B A M M 43 50 15 45 49 44 46 48 47 53 58 54 55 56 57 8 8 3 59 6 6 9 7 16 7 18 19 4 20 21 4 17 ...
Страница 26: ...3 8 Grease point 1 2 FL 942 SW 902 SW 522B FG 84M C68 EP 56 Grease Reverse side A 1 2 72 24 ...
Страница 27: ...3 9 Grease point 2 2 12 35 5 30 20 19 3 16 38 42 43 4 39 37 15 ...
Страница 33: ...3 15 MEMO ...