ENGLISH
19
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
AUDIO SETTINGS
SPK/PRE
OUT
(Not applicable when 3-way crossover is selected.)
Depending on the speaker connection method, select the appropriate
setting to get the desired output. (
Speaker output settings
)
SPEAKER SIZE
Depending on the crossover type you have selected (
[X ' OVER TYPE]
),
2-way crossover or 3-way crossover setting items will be shown.
(
20
,
Crossover settings
)
By default, 2-way crossover type is selected.
X ' OVER
DTA SETTINGS
For settings,
21
,
Digital Time Alignment settings
.
CAR SETTINGS
X ' OVER TYPE
Caution
: Adjust the volume before changing the
[X ' OVER TYPE]
to avoid
the sudden increase or decrease of the output level.
2-WAY
(Displayed only when
[3-WAY]
is selected)
YES
: Selects two way crossover type. ;
NO
: Cancels.
3-WAY
(Displayed only when
[2-WAY]
is selected)
YES
: Selects three way crossover type. ;
NO
: Cancels.
SOUND EFFECT
SPACE ENHANCE
(Not applicable for TUNER source.)
SMALL/MEDIUM/LARGE
: Virtually enhances the sound space. ;
OFF
: Cancels.
SND RESPONSE
LEVEL1
/
LEVEL2
/
LEVEL3
: Virtually makes the sound more realistic. ;
OFF
: Cancels.
SOUND LIFT
LOW
/
MIDDLE
/
HIGH
: Virtually adjust the sound position heard from the
speakers. ;
OFF
: Cancels.
VOL LINK EQ
ON
: Boosts the frequency to reduce the noise heard from outside the car or
running noise of the tyres. ;
OFF
: Cancels.
K2 TECHNOLOGY
(Not applicable for TUNER source and AUX source.)
ON
: Improve the sound quality of compressed music. ;
OFF
: Cancels.
Speaker output settings
[SPK/PRE OUT]
(Applicable only if
[X ' OVER TYPE]
is set to
[2-WAY]
)
Select the output setting for the speakers
[SPK/PRE OUT]
, based on the
speaker connection method.
Connection via lineout terminals
For connections through an external amplifier.
( 30)
Setting on
[SPK/PRE OUT]
Audio signal through lineout terminal
FRONT
REAR/SW
REAR/REAR
Front speakers output
Rear speakers output
REAR/SUB.W
(default)
Front speakers output
Subwoofer output
SUB.W/SUB.W
Front speakers output
Subwoofer output
Connection via speaker leads
For connections without using an external amplifier. However, with this
settings you can also enjoy the subwoofer output.
( 30)
Setting on
[SPK/PRE OUT]
Audio signal through rear speaker lead
L (left)
R (right)
REAR/REAR
Rear speakers output
Rear speakers output
REAR/SUB.W
Rear speakers output
Rear speakers output
SUB.W/SUB.W
Subwoofer output
(Mute)
If
[SUB.W/SUB.W]
is selected:
–
[120HZ]
is selected in
[SUBWOOFER LPF]
and
[THROUGH]
is not available.
–
[POSITION R02]
is selected in
[FADER]
and selectable range is
[POSITION R15]
to
[POSITION 00]
.
JS_JVC_KD-X341BT_M_EN_2.indd 19
JS_JVC_KD-X341BT_M_EN_2.indd 19
9/8/2016 12:20:32 PM
9/8/2016 12:20:32 PM
