4
GETTING STARTED
Cancel the demonstration
When you turn on the power for the first time (or [
FACTORY RST
]
is set to [
YES
]), the display shows: “CANCEL DEMO” “PRESS”
“VOLUME KNOB”
1
Press the volume knob.
[
YES
] is selected for the initial setup.
2
Press the volume knob again.
“DEMO
OFF”
appears.
Set the clock
1
Press and hold
.
2
Turn the volume knob to select [
CLOCK
], then press the
knob.
3
Turn the volume knob to select [
CLOCK SET
], then press the
knob.
4
Turn the volume knob to make the settings, then press
the knob.
Day Hour Minute
5
Turn the volume knob to select [
24H/ 12H
], then press the
knob.
6
Turn the volume knob to select [
12 HOUR
] or [
24 HOUR
],
then press the knob.
7
Press
to exit.
To return to the previous setting item, press
.
1
2
Set the basic settings
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then press
the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
XX
SETTINGS
BEEP
(Not applicable when 3-way crossover is selected.)
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
SRC SELECT
AM
*
ON
: Enables AM in source selection. ;
OFF
: Disables.
PANDORA
*
ON
: Enables PANDORA in source selection. ;
OFF
: Disables.
IHEART
*
ON
: Enables IHEARTRADIO in source selection. ;
OFF
: Disables.
AUX
*
ON
: Enables AUX in source selection. ;
OFF
: Disables.
F/W UPDATE
SYSTEM
F/W xxxx
YES
: Starts upgrading the firmware. ;
NO
: Cancels (upgrading is not activated).
For details on how to update the firmware, see: <http://www.jvc.net/cs/car/>.
FACTORY RST YES
: Resets the settings to default (except the stored station). ;
NO
: Cancels.
CLOCK
CLOCK SYNC
AUTO
: The clock time is automatically set using the Clock Time (CT) data in FM Radio
Broadcast Data System signal. ;
OFF
: Cancels.
CLOCK DISP
ON
: The clock time is shown on the display even when the unit is turned off. ;
OFF
: Cancels.
ENGLISH
Select the display language for menu and music information if applicable.
By default,
ENGLISH
is selected.
ESPANOL
* Not displayed when the corresponding source is selected.
3
JS_JVC_KD_X330BTS_X33MBS_K_EN_2.indd 4
13/10/2015 12:05:22 PM
