JVC KD-X168M, Инструкция по эксплуатации

Страница: 16 / 60

14
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
REFERENCES
Change the display information
Each time you press , the display information changes.
• If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other information
(eg. station name) appears or display will be blank.
Source name Display information: Main
FM/AM Frequency Clock back to the beginning
For FM Radio Data System stations only:
Station name/Program type Radio text Radio text+
Radio text+ song title/Radio text+ artist Frequency Clock
back to the beginning
USB For MP3/WMA/WAV/FLAC files:
Song title/Artist Album title/Artist Folder name File name
Playing time Clock back to the beginning
ANDROID Source name Clock back to the beginning
AUX Source name Clock back to the beginning
Main display
TROUBLESHOOTING
Symptom Remedy
General
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears. Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
“PROTECTING SEND SERVICE”
appears. Send the unit to the nearest service center.
Source cannot be selected. Check the [SOURCE SELECT] setting. (Page 4)
The unit does not work at all. Reset the unit. (Page 3)
Correct characters are not
displayed. • This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 5), some characters may not be displayed
correctly.
Radio
• Radio reception is poor.
• Static noise while listening
to the radio.
Connect the antenna firmly.
USB
Playback order is not as
intended. The playback order is determined by the file name (USB).
Elapsed playing time is not
correct. This depends on the recording process earlier (USB).
“NOT SUPPORT” appears and
track skips. Check whether the track is a playable format.
(Page 13)
“READING” keeps flashing. • Do not use too many hierarchical levels and folders.
• Reattach the device (USB).
JS_JVC_KD_X168M_M2_EN_3.indd 14 JS_JVC_KD_X168M_M2_EN_3.indd 14 7/12/2018 1:55:53 PM 7/12/2018 1:55:53 PM