JVC KD-X152M, Инструкция по эксплуатации

Страница: 16 / 60

14
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom Remedy
General
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHECK
WIRING THEN PWR ON”
appears. Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
“PROTECTING SEND
SERVICE” appears. Send the unit to the nearest service center.
Source cannot be selected. Check the [SOURCE SELECT] setting. ( 4)
Radio
• Radio reception is poor.
• Static noise while
listening to the radio.
Connect the antenna firmly.
USB
Playback order is not as
intended. The playback order is determined by the file name .
Elapsed playing time is not
correct. This depends on the recording process earlier.
“NOT SUPPORT” appears
and file skips. Check whether the file is a playable format. ( 13)
“READING” keeps flashing. • Do not use too many hierarchical levels and folders.
• Reattach the USB device.
“CANNOT PLAY” flashes
and/or connected device
cannot be detected. • Check whether the connected device is compatible with
this unit and ensure the files are in supported formats.
( 13)
• Reattach the device.
Correct characters are not
displayed. • This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
( 5) , some characters may not be displayed
correctly.
Symptom Remedy
ANDROID
• Sound cannot be heard
during playback.
• Sound output only from
the Android device.
• Reconnect the Android device.
• If in
[AUDIO MODE] , launch any media player
application on the Android device and start playback.
• If in [AUDIO MODE] , relaunch the current media player
application or use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected
Android device is unable to route the audio signal to
unit.
( 13)
Cannot playback at
[AUTO MODE] .
• Make sure JVC MUSIC PLAY APP is installed on the
Android device. ( 7)
• Reconnect the Android device and select the appropriate
control mode. ( 8)
• If this does not solve the problem, the connected
Android device does not support [AUTO MODE] .
( 13)
“NO DEVICE” or “READING”
keeps flashing. • Switch off the developer options on the Android device.
• Reconnect the Android device.
• If this does not solve the problem, the connected
Android device does not support [AUTO MODE] .
( 13)
Playback is intermittent or
sound skips. Turn off the power saving mode on the Android device.
“CANNOT PLAY” • Make sure Android device contains playable audio files.
• Reconnect the Android device.
• Restart the Android device.
If you still have troubles, reset the unit. ( 3)
JS_JVC_KD-X152M_M2_EN_1.indd 14 JS_JVC_KD-X152M_M2_EN_1.indd 14 10/7/2017 3:11:10 PM 10/7/2017 3:11:10 PM