10
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
AMP
GAIN
LOW
POWER
: Limits the maximum volume level to 30.
(Select if the maximum power of each speaker is less than
50 W to prevent damaging the speakers.) ;
HIGH POWER
: The
maximum volume level is 50.
D.T.EXP
(Digital Track
Expander)
ON
: Creates realistic sound by compensating the high-
frequency components and restoring the rise-time of
the waveform that are lost in audio data compression. ;
OFF
: Cancels.
TEL
MUTING
*
5
ON
: Mutes the sounds while using the cellular phone (not
connected through KS-BTA100). ;
OFF
: Cancels.
SPK/PRE
OUT
Selects the appropriate setting to get the desired output. (
See
the following table
.)
*
5
Does not work if [
BT
ADAPTER
] is selected for [
AUX
] in [
SRC
SELECT
]. (
4
)
SPK/PRE OUT
Setting
Lineout terminal
Rear speaker lead
REAR/SW
L (left)
R (right)
REAR/REAR
Rear speakers
output
Rear speakers
output
Rear speakers
output
REAR/SUB.W
Subwoofer output
Rear speakers
output
Rear speakers
output
SUB.W/SUB.W
Subwoofer output
Subwoofer output
(Mute)
If [
SUB.W/SUB.W
] is selected:
– [
HIGH 120HZ
] is selected in [
SUB.W
LPF
] and [
THROUGH
] is not
available.
– [
R01
] is selected in [
FADER
] and selectable range is [
R06
] to [
00
]
AUDIO SETTINGS
1
Press and hold
.
2
Turn the volume knob to make a selection (see the following table), then
press the knob.
3
Repeat step
2
until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
XX
DISPLAY
DIMMER
Selects the display and button illumination adjusted in the [
BRIGHTNESS
] setting.
OFF
: Selects the day adjustments. ;
ON
: Selects the night adjustments. ;
DIMMER
TIME
: Adjusts the dimmer on and off time.
Turn the volume knob to adjust the [
ON
] time, then press the knob.
Turn the volume knob to adjust the [
OFF
] time, then press the knob.
(Default: [
ON
]: 18:00 or 6:00 PM
[
OFF
]: 6:00 or 6:00 AM)
AUTO
: Changes between the day and night adjustments when you turn off or on the car
headlights. *
1
BRIGHTNESS
Sets the button, display and USB input terminal brightness for day and night separately.
1
DAY
/
NIGHT
: Select day or night.
2
Select a zone for setting. (
Illustration above
)
3
Set the brightness level (
00
to
31
). (Default:
BUTTON ZONE
:
DAY
:
25
;
NIGHT
:
09
DISP ZONE
:
DAY
:
31
;
NIGHT
:
12
)
SCROLL
*
2
ONCE
: Scrolls the display information once. ;
AUTO
: Repeats scrolling at 5-second
intervals. ;
OFF
: Cancels.
[
NIGHT COLOR
] or [
DAY COLOR
] is changed by turning on or off your car’s headlight.
*
1
The illumination control wire connection is required. (
15
)
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
DISPLAY SETTINGS
JS_JVC_KD_X120_EU_EN_06_3.indd 10
JS_JVC_KD_X120_EU_EN_06_3.indd 10
17/9/2014 9:09:37 AM
17/9/2014 9:09:37 AM
