JVC KD-SX875 Скачать руководство пользователя страница 34

Страница: 34 / 40

ENGLISH

Causes

CD is inserted upside down.

You are driving on rough roads.

CD is scratched.

Connections are incorrect.

The volume is set to the
minimum level.

Connections are incorrect.

Signals are too weak.

The antenna is not connected
firmly.

No CD is in the loading slot (or
in the magazine).

CD is inserted incorrectly.

This unit is not connected to a
CD changer correctly.

The CD player may function
incorrectly.

The built-in microcomputer may
function incorrectly due to noise,
etc.

What appears to be trouble is not always serious. Check the following points before calling a
service centre.

TROUBLESHOOTING

Symptoms

• CD cannot be played back.

• CD sound is sometimes

interrupted.

• Sound cannot be heard from

the speakers.

• SSM (Strong-station

Sequential Memory)
automatic preset does not
work.

• Static noise while listening to

the radio.

• “NO DISC” appears on the

display.

• “RESET 8” appears on the

display.

• “RESET 1-RESET 7” appears

on the display.

• CD can be neither played

back nor ejected.

• This unit does not work at all.
• The CD changer does not

work at all.

Remedies

Insert the CD correctly.

Stop CD play while driving on
rough roads.

Change the CD.

Check the cords and
connections.

Adjust it to the optimum level.

Check the cords and
connections.

Store stations manually.

Connect the antenna firmly.

Insert CD.

Insert it correctly.

Connect this unit and the CD
changer correctly and press the
reset button of the CD changer.

Press the reset button of the
CD changer.

Press CD and SEL at the same
time for several seconds.
(“PLEASE” and “EJECT” appear
on the display alternately.) When
you open the control panel by
pressing

, be careful not to drop

CD when it is ejected.

Press the reset button on the
panel holder. (The clock setting
and preset stations stored in
memory are erased.) (See page
2.)

EN33-35KD-SX975/SX875[U]f

18/1/01, 09:32

Содержание KD-SX875









































Результаты поиска

Содержание KD-SX875

Отзывы:

Похожие инструкции для KD-SX875

Бренды по названию

Популярные бренды

JVC KD-SX875, Инструкция по эксплуатации

Результаты поиска

Содержание KD-SX875

Отзывы:

Похожие инструкции для KD-SX875

Бренды по названию

Популярные бренды