KD-SX745,KD-SX695
1-6 (No.49811)
2.1.5
Removing the rear bracket (See Fig.8)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink and bottom
cover.
(1) Remove the three screws
D
, three screws
E
and three
screws
F
on the back side of the main body.
(2) Remove the rear bracket.
Fig.8
2.1.6
Removing the main board (See Fig.9)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink, bottom
cover and rear bracket.
(1) Remove the two screws
G
attaching the main board.
(2) Disconnect the connector CN501 and remove the main
board.
Fig.9
2.1.7
Removing the CD mechanism assembly (See Fig.10)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink, bottom
cover, rear bracket and main board.
(1) Remove the three screws
H
.
Fig.10
E
F
D
D
E
Rear bracket
F
Main board assembly
G
G
CN501
H
H
CD mechanism assembly
Top chassis
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299