32
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Audio Settings
2-way crossover setting items
[SPEAKER SIZE]
[FRONT]
[SIZE]
[3.5"]
/
[4"]
/
[4.75"]
/
[5"]
/
[6.5"]
/
[6.75"]
/
[7"]
/
[4×6]
/
[5×7]
/
[6×8]
/
[6×9]
/
[7×10]
[TWEETER]
[SMALL]
/
[MIDDLE]
/
[LARGE]
/
[NONE]
(not
connected)
[REAR]
*1
[3.5"]
/
[4"]
/
[4.75"]
/
[5"]
/
[6.5"]
/
[6.75"]
/
[7"]
/
[4×6]
/
[5×7]
/
[6×8]
/
[6×9]
/
[7×10]
/
[NONE]
(not connected)
[SUBWOOFER]
*2*3
[6.5"]
/
[8"]
/
[10"]
/
[12"]
/
[15" OVER]
/
[NONE]
(not connected)
[X ' OVER]
[TWEETER]
[FRQ]
[1KHZ]
/
[1.6KHZ]
/
[2.5KHZ]
/
[4KHZ]
/
[5KHZ]
/
[6.3KHZ]
/
[8KHZ]
/
[10KHZ]
/
[12.5KHZ]
[GAIN LEFT]
[–08DB]
to
[00DB]
[GAIN RIGHT]
[–08DB]
to
[00DB]
[FRONT HPF]
[F-HPF FRQ]
[30HZ]
/
[40HZ]
/
[50HZ]
/
[60HZ]
/
[70HZ]
/
[80HZ]
/
[90HZ]
/
[100HZ]
/
[120HZ]
/
[150HZ]
/
[180HZ]
/
[220HZ]
/
[250HZ]
/
[THROUGH]
[F-HPF SLOPE]
[–06DB]
/
[–12DB]
/
[–18DB]
/
[–24DB]
[F-HPF GAIN]
[–08DB]
to
[00DB]
[REAR HPF]
*1
[R-HPF FRQ]
[30HZ]
/
[40HZ]
/
[50HZ]
/
[60HZ]
/
[70HZ]
/
[80HZ]
/
[90HZ]
/
[100HZ]
/
[120HZ]
/
[150HZ]
/
[180HZ]
/
[220HZ]
/
[250HZ]
/
[THROUGH]
[R-HPF SLOPE]
[–06DB]
/
[–12DB]
/
[–18DB]
/
[–24DB]
[R-HPF GAIN]
[–08DB]
to
[00DB]
Crossover settings
Below are the available setting items for 2-way crossover and 3-way
crossover.
CAUTION
Select a crossover type according to how the speakers are connected.
(Page 46, 47)
If you select a wrong type:
• The speakers may be damaged.
• The output sound level may be extremely high or low.
SPEAKER SIZE
Selects according to the connected speaker size for optimum performance.
• The frequency and slope settings are automatically set for the crossover of
the selected speaker.
• If
[NONE]
is selected for the following speaker in
[SPEAKER SIZE]
, the
[X ‘ OVER]
setting of the selected speaker is not available.
–
2-way
crossover:
[TWEETER]
of
[FRONT]
/
[REAR]
/
[SUBWOOFER]
–
3-way
crossover:
[WOOFER]
X ‘ OVER (crossover)
•
[FRQ]
/
[F-HPF FRQ]
/
[R-HPF FRQ]
/
[SW LPF FRQ]
/
[HPF FRQ]
/
[LPF FRQ]
: Adjusts the
crossover frequency for the selected speakers (high pass filter or low pass
filter).
If
[THROUGH]
is selected, all signals are sent to the selected speakers.
•
[SLOPE]
/
[F-HPF SLOPE]
/
[R-HPF SLOPE]
/
[SW LPF SLOPE]
/
[HPF SLOPE]
/
[LPF SLOPE]
:
Adjusts the crossover slope.
Selectable only if a setting other than
[THROUGH]
is selected for the
crossover frequency.
•
[SW LPF PHASE]
/
[PHASE]
: Selects the phase of the speaker output to be in line
with the other speaker output.
•
[GAIN LEFT]
/
[GAIN RIGHT]
/
[F-HPF GAIN]
/
[R-HPF GAIN]
/
[SW LPF GAIN]
/
[GAIN]
: Adjusts
the output volume of the selected speaker.
JS_JVC_KD_T915BTS_K_EN_3.indd 32
JS_JVC_KD_T915BTS_K_EN_3.indd 32
5/21/2019 10:00:26 AM
5/21/2019 10:00:26 AM
