KD-SH77R/KD-SH55R
1-11
Remove the four screws U attaching the rear panel
to the front panel assembly.
Release the eleven joints f of the front panel and the
rear panel.
Disconnect the wire from connector CN503 on the
front board.
If necessary, unsolder connector CN502 on the front
board.
1.
2.
3.
4.
<Front panel assembly>
Removing the front board
(See Fig.24 and 25)
Prior to performing the following procedure, remove
the rear panel.
Remove the two screws W attaching the volume
board.
Disconnect the volume knob, ring lens and volume
ring from the volume board.
If necessary, unsolder the volume board.
1.
2.
3.
Removing the volume board
(See Fig.25 and 26)
Prior to performing the following procedure, remove
the rear panel.
Disconnect the wire from connector CN503 on the
front board.
Pull out the line in board from the front panel
assembly.
1.
2.
Removing the line in board
(See Fig.25 and 27)
Prior to performing the following procedure, remove
the front panel assembly.
Fig.24
Fig.25
Fig.26
Fig.25
Joint f 11
Rear panel
U
U
U
U
Front board Soldering
(CN502)
Soldering
Volume board
W
W
V
V
CN503
Line in board
Rng knob
Volume lens, Volume ring
Volume board
Line in board
Содержание KD-SH55R
Страница 59: ...3 15 KD SH77R SH55R M E M O ...
Страница 62: ...KD SH77R SH55R 3 18 M E M O ...
Страница 77: ...3 33 KD SH77R SH55R M E M O ...