KD-S735R
1-6
2.1.5 Removing the main board
(See Fig.7 and 8)
• Prior to performing the following procedure, remove the front
panel assembly, the front chassis assembly, the heat sink and
the bottom cover.
(1) Remove the screw
B
, the two screws
C
and the three
screws
D
attaching the rear bracket on the back of the
body. Remove the rear panel.
(2) Remove the two screws
E
attaching the main board on
the bottom of the body. Disconnect connector CN501 on
the main board in the direction of the arrow.
Fig.7
Fig.8
2.1.6 Removing the CD mechanism section
(See Fig.9)
• Prior to performing the following procedure, remove the front
panel assembly, the front chassis assembly, the heat sink, the
bottom cover and the main board.
(1) Remove the three screws
F
attaching the cassette mech-
anism section on the back of the top chassis.
Fig.9
Rear panel
B
D
D
D
C
C
Main board
E
E
CN501
CD mechanism section
F
F
Top chassis
F
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299