background image

3 – EN

You need the installation kits which corresponds to your car.
•  Mark all the check boxes ( 

 ) to make sure you have follow the instructions and the listed parts.

Check the battery system in your car

Prepare this before installation

  Audio amplifier section

Power Output:

 

20 W RMS × 4 Channels at 4 Ω and 

 1% THD+N

Signal to Noise Ratio:

 

80 dBA (reference: 1 W into 4 Ω)

Load Impedance: 

4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range: 

Bass: 

±12 dB at 60 Hz

 

 

Mid-range:  ±12 dB at 1 kHz

 

 

Treble: 

±12 dB at 7.5 kHz

Frequency Response: 

40 Hz to 20 000 Hz

Line-Out Level/Impedance:  2.5 V/20 kΩ load (full scale)
Output Impedance: 

1 kΩ

Subwoofer-Out Level/Impedance:
 

 

2.5 V/20 kΩ load (full scale)

Indication

Item 

(        : Initial)

Setting

DEMO

• 

DEMO ON

• 

DEMO OFF

:  The display demonstration will be activated automatically if no operation is 

done for about 20 seconds.

:  Cancels.

CLK DISP

 

*

1

• 

ON

• 

OFF

:  The clock time is shown on the display at all times when the power is turned 

off.

:   Cancels; pressing DISP will show the clock time for about 5 seconds when the 

power is turned off.

CLOCK H

 (Hour)

1

 – 

12

:  [Initial: 1 (1:00)]

CLOCK M

 (Minute)

00

 – 

59

:  [Initial: 00 (1:00)]

DIMMER

• 

ON

 

• 

OFF

:  Dims the display and button illumination.
:  Cancels.

SCROLL

• 

ONCE

• 

AUTO

• 

OFF

  

:  Scrolls the displayed information once.
:  Repeats scrolling (at 5-second intervals).
:  Cancels. 
•  Pressing DISP for more than one second can scroll the display regardless of 

the setting.

L/O MODE

• 

REAR

• 

WOOFER

 

:  Select if the REAR LINE OUT terminals are used for connecting the speakers 

(through an external amplifier).

:  Select if the REAR LINE OUT terminals are used for connecting a subwoofer.

WOOFER

 

*

2

• 

LOW

 

• 

MID

• 

HIGH

 

:  Frequencies lower than 90 Hz are sent to the subwoofer.
:  Frequencies lower than 135 Hz are sent to the subwoofer.
:  Frequencies lower than 180 Hz are sent to the subwoofer.

AUX ADJ

A.ADJ 00 
– A.ADJ 05

:  Adjust the auxiliary input level to avoid the sudden increase of the output 

level when changing the source from external component connected to the 
AUX input jack on the control panel.

AMP GAIN 

*

3

• 

LOW PWR

• 

HIGH PWR

:  VOL 00 – VOL 30 (Select if the maximum power of each speaker is less than 

50 W to prevent the speaker from being damaged.)

:  VOL 00 – VOL 50

AREA

• 

AREA US

• 

AREA EU

• 

AREA SA

:  When using in North/Central/South America. AM/FM intervals are set to 

10 kHz/200 kHz.

:  When using in any other areas. AM/FM intervals are set to 9 kHz/50 kHz 

(100 kHz during auto search).

:  When using in South American countries. AM/FM intervals are set to 10 kHz/

100kHz.

*

1

  If the power supply is not interrupted by turning off the ignition key of your car, it is recommended that you select “OFF” to 

save the car’s battery.

*

2

  Displayed only when “L/O MODE” is set to “WOOFER.”

*

3

  The volume level automatically changes to “VOL 30” if you change to “LOW PWR” while the volume level is set higher than 

“VOL 30.”

  General

Power Requirement: 

Operating Voltage: DC 14.4 V
(11 V to 16 V allowance)

Grounding System: 

Negative ground

Allowable Operating Temperature:
 

 

0°C to +40°C (32°F to 104°F)

Dimensions (W × H × D):
 

Installation Size (approx.):

 

 

182 mm × 52 mm × 160 mm

 

 

(7-3/16” × 2-1/16” × 6-5/16”)

 

Panel Size (approx.):

 

 

188 mm × 58 mm × 5 mm

 

 

(7-7/16” × 2-5/16” × 1/4”) 

 

Mass (approx.):

 

 

1.3 k

g

 (2.9 lbs) (excluding accessories)

Design and specifications are subject to change without 
notice.

If a kit is necessary for your car, consult your telephone 
directory for the nearest car audio speciality shop.

SPECIFICATIONS

 

INSTRUCTIONS

  Tuner section

Frequency Range:
 

FM:  87.5 MHz to 107.9 MHz 

(with channel interval set to 100 kHz or 200 kHz)

 

 

87.5 MHz to 108.0 MHz 
(with channel interval set to 50 kHz)

 

AM:  530 kHz to 1 710 kHz 

(with channel interval set to 10 kHz)

 

 

531 kHz to 1 602 kHz 
(with channel interval set to 9 kHz)

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)
50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω)
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 35 dB

[AM Tuner]

Sensitivity/Selectivity:  20 μV/35 dB

  General settings—PSM

Select an item.

Adjust.

Finish

Enter PSM menu.

Symptoms

Remedies/Causes

General

•  Sound cannot be heard from the speakers.

•  Adjust the volume to the optimum level.
•  Check the cords and connections.

•  The buttons on the unit do not work as you 

intended.

If you press M MODE, some buttons work differently from it 
original function. Wait for 5 seconds or press M MODE again.

•  This unit does not work at all.

Reset the unit.

FM/AM

•  SSM automatic presetting does not work.

Store stations manually.

•  Static noise while listening to the radio.

Connect the antenna firmly.

Disc playback

•  Disc ejects.

Insert the disc correctly.

•  CD-R/CD-RW cannot be played back.
•  Tracks on the CD-R/CD-RW cannot be 

skipped.

•  Insert a finalized CD-R/CD-RW.
•  Finalize the CD-R/CD-RW with the component which you used 

for recording.

•  Disc can be neither played back nor ejected. •  Unlock the disc.

•  Eject the disc forcibly.

•  Disc sound is sometimes interrupted.

•  Stop playback while driving on rough roads.
•  Change the disc.
•  Check the cords and connections.

•  “NO DISC” appears on the display.
•  “PLEASE” and “EJECT” appear alternately 

on the display.

Insert a playable disc into the loading slot.

•  Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United 

States and/or other countries.

TROUBLESHOOTING

PREPARATION

TROUBLESHOOTING

•  The fuse blows.

*  Are the red and black leads connected correctly?

•  Power cannot be turned on.

*  Is the yellow lead connected?

•  No sound from the speakers.

*  Is the speaker output lead short-circuited?

•  Sound is distorted.

*  Is the speaker output lead grounded?
*  Are the “–” terminals of L and R speakers grounded in common?

•  Noise interfere with sounds.

*  Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?

•  This unit becomes hot.

*  Is the speaker output lead grounded?
*  Are the “–” terminals of L and R speakers grounded in common?

•  This unit does not work at all.

*  Have you reset your unit?

  CD player section

Type: 

Compact disc player

Signal Detection System:  Non-contact optical pickup 

(semiconductor laser)

Number of channels: 

2 channels (stereo)

Frequency Response: 

5 Hz to 20 000 Hz

Dynamic Range: 

93 dB

Signal-to-Noise Ratio: 

98 dB

Wow and Flutter: 

Less than measurable limit

Having TROUBLE with operation?

Please reset your unit

Still having trouble??

Call 1-800-252-5722 (USA ONLY)

http://www.jvc.com

12 V DC, NEGATIVE ground

EN_KD-S15[J]_f.indd   3

EN_KD-S15[J]_f.indd   3

5/13/08   5:16:04 PM

5/13/08   5:16:04 PM

Содержание KD-S15

Страница 1: ...be skipped while playing Some CD Rs or CD RWs may not be played back on this unit Discs are dirty or scratched Moisture condensation has occurred on the lens inside the unit The pickup lens inside the unit is dirty The files on the CD R CD RW are written using the Packet Write method There are improper recording conditions missing data etc or media conditions stained scratched warped etc CD RWs ma...

Страница 2: ...briefly or attenuates the sound when power is on Turns the power off if pressed and held Changes the FM AM bands with 5 U Changes the preset stations with D Adjusts the volume level Selects the sound mode iEQ intelligent equalizer Selects the source Searches for stations if pressed briefly Fast forwards or reverses the track if pressed and held Changes the track of the disc if pressed briefly Sele...

Страница 3: ...approx 1 3 kg 2 9 lbs excluding accessories Designandspecificationsaresubjecttochangewithout notice If a kit is necessary for your car consult your telephone directory for the nearest car audio speciality shop SPECIFICATIONS INSTRUCTIONS Tuner section Frequency Range FM 87 5 MHz to 107 9 MHz with channel interval set to 100 kHz or 200 kHz 87 5 MHz to 108 0 MHz with channel interval set to 50 kHz A...

Страница 4: ...th black stripe Rear line out Rear ground terminal Antenna terminal Set L O MODE to WOOFER See General settings PSM You can also connect a subwoofer to the REAR LINE OUT terminals Rear speakers Remote lead Remote lead blue with white stripe To the remote lead of other equipment or automatic antenna if any Y connector 1 Front speakers Subwoofer Set L O MODE to REAR See General settings PSM You can ...

Отзывы: